RadioShack 16-913 用户指南
12
S
e
tu
p
Connecting an Antenna
Indoor Antenna
Plug one end of a 75-ohm coaxial cable with an F connector (not supplied) to the TUNER
jack on back of the TV, and its other end to the antenna (not supplied).
Outdoor Antenna
For best reception, use a high-quality outdoor antenna (not supplied).
Plug one end of a 75-ohm coaxial cable with an F connector (not supplied) to the TUNER
jack on the back of the TV, and the other end to the antenna’s wall outlet. If your outdoor
antenna uses a 300-ohm coaxial cable, plug it into the TUNER jack using a 300-to-75-ohm
transformer.
If you have separate UHF and VHF antennas, connect the separate antenna cables to a
VHF/UHF combiner, then connect the combiner’s output to the TUNER jack on the TV.
w
Warning: When you install an outdoor antenna, use extreme caution. If the antenna starts
to fall, let it go! It could contact overhead power lines. If the antenna touches the power line,
contact with the antenna, mast, cable, or guy wires could cause electrocaution and death. Call
the power company to remove the antenna. DO NOT attempt to remove it yourself!
Connecting an HDMI Device
Use a standard high speed HDMI cable (not supplied) to connect to the HDMI port. The
HDMI connection supports HD video signal up to 720p.
VHF/UHF Combiner
VHF Antenna
UHF Antenna