Summit sbc490 规格指南
BEER CONDITION: CLOUDY BEER:
The beer in the glass appears hazy and not clear.
The beer in the glass appears hazy and not clear.
Cause #1
Excessively low temperatures may cause hazy or cloudy beer, particularly when the beer
lies in the cold coil for long periods of time.
lies in the cold coil for long periods of time.
Correction
*Do not wash beer glasses together with glasses that have contained milk or any other
fatty substance. An excessive amount of germicide build-up may also leave a fatty film,
which will cause beer to go flat.
*It is preferable to steam and sterilize glasses where health laws permit.
*Wash glasses thoroughly with a good detergent to remove all fatty
fatty substance. An excessive amount of germicide build-up may also leave a fatty film,
which will cause beer to go flat.
*It is preferable to steam and sterilize glasses where health laws permit.
*Wash glasses thoroughly with a good detergent to remove all fatty
substances(i.e.lipstick)
*Do not use soap
*Do not wipe the glasses dry. Permit glasses to air-dry by placing them on a wire rack or
on a corrugated metal
*Rinse the glasses in fresh cold water just before serving beer. It is best to serve beer in a
wet glass.
Cause #2
Improper drawing of beer into glass
Correction
Open the faucet quickly and completely; proper foam should be a tight creamy head. The
collar on the average glass should be ¾” to 1” high. Beer drawn without head has the
appearance of being flat
collar on the average glass should be ¾” to 1” high. Beer drawn without head has the
appearance of being flat
Cause #3
Not enough pressure
Correction
Increase the pressure if beer runs too slowly. The correct flow should fill a 10oz glass in
4 seconds. (Approx.8oz of liquid). Check the pressure source to determine whether there
are obstructions in the air line. Replace a sluggish air source or the CO2 regulator and
gauge. The tank pressure must always be higher than the pressure used on the keg.
Always apply pressure to the keg before drawing beer.
BEER CONDITION: OFF TASTE BEER
Often bitter and bity; sometimes completely lacking flavor and zest. It may also have an
oily or foul odor which may carry an unpleasant taste.
4 seconds. (Approx.8oz of liquid). Check the pressure source to determine whether there
are obstructions in the air line. Replace a sluggish air source or the CO2 regulator and
gauge. The tank pressure must always be higher than the pressure used on the keg.
Always apply pressure to the keg before drawing beer.
BEER CONDITION: OFF TASTE BEER
Often bitter and bity; sometimes completely lacking flavor and zest. It may also have an
oily or foul odor which may carry an unpleasant taste.
16