Pogo Radio YourWay LX 128MB 快速安装指南
QUICK START GUIDE
1
Component and LCD Display
1
2
3
4
5
6
7
8
1 8
9
1 0
1 1
1 2
1 3
1 4
1 5
1 6
1 7
1
2
3
4
5
6
7
8
9
1 8
1 0
1 1
1 2
1 3
1 4
1 5
1 6
1 7
Internal Microphone
MENU
LED
SPEED
LCD
External Speaker
REC
USB/POWER Terminal
ERASE
Volume
＋/－
A B/Repeat
↔
HOLD
MODE
RESET
TIMER
LINE IN
SD/MMC Card Slot
Earphone Jack
2
Charging The Battery
3
Using a Memory Card
Please fully charge the battery
prior to using Radio YourWay LX.
The battery can be charged using
the AC adaptor, or by making
a USB connection with a PC or
MAC. It takes approximately
4hrs to fully charge the battery
using either method.
prior to using Radio YourWay LX.
The battery can be charged using
the AC adaptor, or by making
a USB connection with a PC or
MAC. It takes approximately
4hrs to fully charge the battery
using either method.
To Power on the unit, hold the PLAY button for 1-2 seconds.
☞If the HOLD switch is in the ON position, all buttons are disabled and
the power on/off function will NOT work. In this case, slide the
HOLD switch off.
the power on/off function will NOT work. In this case, slide the
HOLD switch off.
When inserting a
memory card
in the unit, carefully
insert the memory
card properly (as shown
in the diagram taking
note of the correct
side up) or you may
damage the card
and/or Ext card slot.
memory card
in the unit, carefully
insert the memory
card properly (as shown
in the diagram taking
note of the correct
side up) or you may
damage the card
and/or Ext card slot.
☞You may need to format the memory card to the FAT file system prior
to using it. Please refer the user manual for more information.
to using it. Please refer the user manual for more information.
LINE/MIC
PHONES
4
Setting Time
5
Setting Date
Press MENU & select SYSTEM using
◀▶ (left/right),next
select CALENDAR using
▲▼ (up/down) and push ▶/ ■ (PLAY).
You will now see a similar screen as the one shown below.
To move between the Year/Month/Date fields, use
To move between the Year/Month/Date fields, use
▲▼ (up/down).
To change the Year/Month/Date, use
◀▶ (left/right). Push ▶/ ■ (PLAY) to
confirm when you are finished.
☞In order for timer recordings to function properly, the correct time and
date MUST be set.
☞Make sure you always have enough battery power. After 1 or 2 hours
of the battery being fully discharged the year/day/hour settings are all
lost and must be set again.
date MUST be set.
☞Make sure you always have enough battery power. After 1 or 2 hours
of the battery being fully discharged the year/day/hour settings are all
lost and must be set again.
Press MENU & select SYSTEM using
◀▶(left/right), next
select TIME SET using
▲▼(up/down) and push ▶/ ■(PLAY).
You will now see a similar screen as the one shown below.
To change the Hour/Minute,
use
use
▲▼ (up/down)
To move between the Hr/Min fields,
use
use
◀▶(left/right). Push ▶/ ■(PLAY)
to confirm when you are finished.