Cisco AIR Line, UK AIR-PWR-CORD-UK= 用户手册

产品代码
AIR-PWR-CORD-UK=
下载
页码 6
 
 
Ordering Guide 
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. 
Page 5 of 6 
Frequency 
Part Number 
Antenna Type 
Antenna Gain (dBi) 
AIR-ANT2465P-R 
Diversity Patch 
6.5 
AIR-ANT2485P-R 
Patch 
AIR-ANT2410Y-R 
Yagi 
10 
AIR-ANT5135DG-R 
Grey Non-Articulating Dipole 
3.5 
AIR-ANT5135D-R 
Black Articulating Dipole 
3.5 
AIR-ANT5140V-R 
Three Element Omni Antenna 
AIR-ANT5145V-R 
Diversity Omni-Directional 
4.5 
5GHz 
 
AIR-ANT5160V-R 
Omni-Directional 
 
For more information on antenna options, visit 
http://www.cisco.com/en/US/products/hw/wireless/ps469/index.html
Power Options 
The Cisco Aironet 1250 Series Access Point may be powered by a Cisco Ethernet switch, a power injector, or a local 
power supply.   
Caution: The Aironet 1250 Series Access Point with two RM1252 radio modules installed requires greater than the 
12.95W allowed for by the 802.3af standard.  Certain Cisco Ethernet switches are capable of providing this greater 
amount of power and can fully power the Aironet 1250 Series Access Point with two RM1252 radio modules 
installed.  Refer to the Aironet 1250 Series Access Point data sheet for further details. 
Caution: An external AC power supply and power cord does not ship with the Cisco Aironet 1250 Series. If one is 
required, it can be configured when the access point is ordered, or ordered as a spare. 
If an Ethernet switch with Power over Ethernet is not being used, the power injector or power supply must be ordered 
either as a configurable option or as a spare. If ordered as a configurable option, the power injector or power supply 
will ship in the same box as the access point. Power options may also be ordered separately as spares as shown in 
Table 6.  
Table 6. 
Cisco Aironet 1250 Series Power Option Part Numbers for Spares 
Part number 
Product Description 
AIR-PWRINJ4= 
Power Injector—1250 Series; Spare 
AIR-PWR-SPLY1= 
Power Supply—1250 Series; Spare 
 
The following powering options are not supported by the Aironet 1250 Series Access Point: 
 
Cisco PoE (6W) 
 
Cisco PoE (13W) 
 
Cisco mid-span 
 
AIR-PWR-A 
 
PWRINJ-FIB 
 
PWRINJ3 
 
AIR-PWRINJ1500