Fujitsu Primergy TX200 S2 S26361-K935-V364#NSI 产品宣传页
产品代码
S26361-K935-V364#NSI
Data Sheet
⏐ Issue: 2/1/2006⏐ PRIMERGY TX200 S2
Page 2 / 2
All rights, including rights created by patent grant or registration of a utility model or design as well
as rights of technical modifications are reserved. Delivery subject to availability. Designations may
be trademarks, the use of which by third parties for their own purposes may violate the rights of the
trademark owners.
Copyright
as rights of technical modifications are reserved. Delivery subject to availability. Designations may
be trademarks, the use of which by third parties for their own purposes may violate the rights of the
trademark owners.
Copyright
© Fujitsu Siemens Computers, 02/2006
Published by
Fujitsu Siemens Computers
http://www.fujitsu-siemens.com/
Company stamp
Type
Dual Processor Tower Server
System board
D 1919
Chip set
Intel® E7320
Processors
64-bit Intel® Xeon™ (1 - 2)
Frequencies (GHz)
2.80, 3.00, 3.20, 3.40
Front-Side-Bus
800 MHz
Second-Level-Cache
2 Mbyte, ECC
Memory
512 Mbyte up to max. 12 Gbyte
2-way interleaved, registered ECC PC2700 DDR1 SDRAM; 3
banks with 2 slots each for modules 256 Mbyte, 512 Mbyte, 1
and 2 Gbyte; memory scrubbing, Chipkill™* and hot-spare
memory support;
** Chipkill™ only with modules > 256 MB
banks with 2 slots each for modules 256 Mbyte, 512 Mbyte, 1
and 2 Gbyte; memory scrubbing, Chipkill™* and hot-spare
memory support;
** Chipkill™ only with modules > 256 MB
Flash-EPROM
Local BIOS update with floppy disk; Remote BIOS-Update via
LAN with Global Flash and service partition / RomPilot, or
through chipDISK / RTDS via modem
Interfaces
Serial
Local BIOS update with floppy disk; Remote BIOS-Update via
LAN with Global Flash and service partition / RomPilot, or
through chipDISK / RTDS via modem
Interfaces
Serial
1x RS-232-C (9-pin) (usable for
BMC or OS or shared)
BMC or OS or shared)
Serial
1x RS-232-C (9-pol)
Parallel (option)
Centronics, 25-pin, EPP/ECP comp.
Keyboard, Mouse
2x PS/2
USB 2.0
1x front, 2x back (UHCI, 480 Mbit/s)
Graphics
1x VGA (15-pin)
LAN
1x RJ45
Front Panel
On/off switch; NMI-, reset button; LEDs for system status
(amber), identification (blue), hard disks access (green), power
(amber/green); (back: system status, identification)
On/off switch; NMI-, reset button; LEDs for system status
(amber), identification (blue), hard disks access (green), power
(amber/green); (back: system status, identification)
Onboard controller **
IDE (ATA100)
IDE (ATA100)
2-channel Fast-IDE controller for 1 de-
vice + RemoteView Diagnosis
vice + RemoteView Diagnosis
SCSI (LSI53C1030)
2-channel Ultra320 SCSI with RAID 1
(Integrated Mirroring Enhanced also
for odd number of HD´s for Windows
and Linux)
(Integrated Mirroring Enhanced also
for odd number of HD´s for Windows
and Linux)
RAID option
(PCI card, ZCR)
(PCI card, ZCR)
RAID level 0, 1, 10, 5, 50 extension for
onboard SCSI/RAID controller
onboard SCSI/RAID controller
LAN (BroadCom5721) 1x 10/100/1000 Mbit/s Ethernet
(PCE-Boot via LAN from PXE server)
Graphics
ATI Rage XL 8 MB
Server management
Baseboard Management Controller
(BMC), IPMI 1.5 compatible
(BMC), IPMI 1.5 compatible
Hard disk drives
36, 73, 146, 300 Gbyte, U320 SCSI
1 Gbyte equals one billion bytes when referring to hard disk drive capacity; accessible
capacity may vary.
capacity may vary.
I/O Slots (Standard)
2x PCI-X 64-bit / 66 MHz, 1xlong, 1xshort 3.3V (ZCR supp.);
2x PCI-X 64-bit / 100 MHz, long, 3.3V;
(1x with max. 133 MHz (IOOP™), if only 1 slot is in use)
1x PCI 32-bit / 33 MHz, long, 5V (RSB support)
Drive bays
for hard disks
2x PCI-X 64-bit / 100 MHz, long, 3.3V;
(1x with max. 133 MHz (IOOP™), if only 1 slot is in use)
1x PCI 32-bit / 33 MHz, long, 5V (RSB support)
Drive bays
for hard disks
6x 3.5/1-inch, hot-plug, slide-in chassis
for optional
hard disks
hard disks
3x 3.5/1-inch, hot-plug, requires
2 bays for accessible drives
2 bays for accessible drives
for accessible drives
2x 5.25/1.6-inch free;
1x 5.25/0,5-inch for opt. CD, DVD;
CD-/DVD-RW
1x 3.5/1-inch occupied with FD drive
1x 5.25/0,5-inch for opt. CD, DVD;
CD-/DVD-RW
1x 3.5/1-inch occupied with FD drive
for optional
accessible drive
accessible drive
1x 3.5/2-inch for hot-plug tape drive,
requires 2 hard disk bays
requires 2 hard disk bays
System fans (hot-
plug)
Standard / redundant (option): (2 + 2) fans + 1 fan per CPU
plug)
Standard / redundant (option): (2 + 2) fans + 1 fan per CPU
Electrical values
1x standard or 2x optional redundant hot-plug power supplies
Output power
600 W / 1 + 1 x 600 W each
Rated voltage range
100 - 240 V
Rated frequency
50 - 60 Hz
Max. rated current
100 V - 240 V / 9.0 A – 5.0 A
AC outlet with standard PSU: 2 A
AC outlet with standard PSU: 2 A
Rated current in basic
configuration
configuration
100 V - 240 V / 4.4 A - 1.5 A
Active power
798 W
Apparent power
809 VA
Heat emission
2873 kJ/h (2723 btu/h)
Temperature/Noise/Dimension/Weight
Ambient temperature
10°C - 35°C (EN60721-3-3 class 3K2)
Sound pressure L
pAm
44 <= 52 dB (A) (ISO9296)
Sound power L
WAd
6.2 <= 6.7 B (ISO9296)
Floor-stand (HxWxD)
473 * 286 * 775 (mm)
Rack (HxWxD)
177 * 483 * 770 (mm);
Rack mounting depth 735 mm; 4 U
Rack mounting depth 735 mm; 4 U
Weight
25 - 40 kg (configuration dependent)
Compliance with Norm and Standards
Product safety
Global
Product safety
Global
IEC 60950-1
Europe
EN 60950-1
USA
UL 60950 3rd. Ed.
Canada
CAN/CSA-C22.2 No. 60950 3rd. Ed.
Electro magnetic compatibility
Europe
Europe
EN 55 022 class A, EN 55024,
EN 61000-3-3
EN 61000-3-3
Taiwan / Japan
CNS 13438 class A; VCCI class A
Australia / New Zealand
AS / NZS 3548 class A
USA / Canada
FCC class A
Declaration of conformity
Europe (CE)
Europe (CE)
89/336/EEC(EMV);73/23 EEC(LVD)
North America
FCC class A
Approvals
Product safety
Global
Product safety
Global
CB
Europe
CE
USA / Canada
CSA
US
/ CSA
C
There is general compliance with the safety requirements of all
European countries and North America. National approvals
required in order to satisfy statutory regulations or for other
reasons, can be applied for on request.
European countries and North America. National approvals
required in order to satisfy statutory regulations or for other
reasons, can be applied for on request.
Supported operating systems
Microsoft: Windows 2003 Standard, Enterprise IA32 Edition;
Microsoft: Windows 2003 Standard, Enterprise x64 Edition;
Microsoft Windows 2003 Web Edition
Microsoft Small Business Server 2003 Stand./Premium Edition*
Microsoft: Windows 2000 Advanced Server; Server
Novell: NetWare 6.5
SCO: UnixWare 7.1.4; Open Server 5.0.7
SUSE: Enterprise Server 8 for x86 and 9 x86 / EM64T
SUSE: Linux 9.2, 9.3 for X86
Red Hat: Enterprise Linux 2.1; 3 and 4 for X86 / EM64T
* No application support
** For supported controllers (onboard and PCI cards for SCSI,
RAID, LAN, WAN, etc.), please refer to the corresponding system
configurator.
Server Management (see separate data sheets)
Microsoft: Windows 2003 Standard, Enterprise IA32 Edition;
Microsoft: Windows 2003 Standard, Enterprise x64 Edition;
Microsoft Windows 2003 Web Edition
Microsoft Small Business Server 2003 Stand./Premium Edition*
Microsoft: Windows 2000 Advanced Server; Server
Novell: NetWare 6.5
SCO: UnixWare 7.1.4; Open Server 5.0.7
SUSE: Enterprise Server 8 for x86 and 9 x86 / EM64T
SUSE: Linux 9.2, 9.3 for X86
Red Hat: Enterprise Linux 2.1; 3 and 4 for X86 / EM64T
* No application support
** For supported controllers (onboard and PCI cards for SCSI,
RAID, LAN, WAN, etc.), please refer to the corresponding system
configurator.
Server Management (see separate data sheets)
Standard:
PRIMERGY ServerView Suite;
PDA, ASR&R
PDA, ASR&R
Optional:
RemoteView with IDE chipDISK and
RemoteView Service Board
RemoteView Service Board