Cisco Aironet 1131AG AIR-LAP1131AG-K-K9 数据表
产品代码
AIR-LAP1131AG-K-K9
Data Sheet
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 2 of 8
maximum concealment, the access point may be placed above ceilings or suspended ceilings. The UL 2043 rating
of the Cisco Aironet 1130AG Series allows the access point to be placed above ceilings in plenum areas regulated
by municipal fire codes. Offered at a competitive price, and optimized for easy installation and operation, the Cisco
Aironet 1130AG Series helps organizations attain a lower total cost of ownership.
Applications
In offices and similarly open environments, Cisco Aironet 1130AG Series access points may be installed on the
ceiling to provide users with continuous coverage as they roam throughout a facility. In school buildings and similar
facilities, the access points may be installed on the ceiling of each room and hallway to provide users with full
coverage and high network availability. In areas where a ceiling installation may not be practical such as retail
hotspots or similar small facilities, the access points can be mounted simply and securely on walls for complete
coverage with minimal installation cost.
Award-Winning Security
The Cisco Aironet 1130AG Series has achieved National Institute of Standards and Technology (NIST) FIPS 140-2
level 2 validation and is in process for Information Assurance validation under the National Information Assurance
Partnership (NIAP) Common Criteria program. The Cisco Aironet 1130AG Series supports 802.11i, Wi-Fi Protected
Access (WPA), WPA2, and numerous Extensible Authentication Protocol (EAP) types. WPA and WPA2 are the Wi-
Fi Alliance certifications for interoperable, standards-based WLAN security. These certifications support IEEE
802.1X for user-based authentication, Temporal Key Integrity Protocol (TKIP) for WPA encryption, and Advanced
Encryption Standard (AES) for WPA2 encryption. These certifications help to ensure interoperability between Wi-Fi-
certified WLAN devices from different manufacturers.
The Cisco Aironet 1130AG Series hardware-accelerated AES encryption supports enterprise-class, government-
grade secure encryption over the WLAN without compromising performance. IEEE 802.1X authentication helps to
ensure that only authorized users are allowed on the network. Backward compatibility and support for WPA client
devices running TKIP, the RC4 encryption algorithm, is also supported by the Cisco Aironet 1130AG Series.
Cisco Aironet 1130AG Series Access Points operating with LWAPP support Cisco Unified Intrusion Detection
System/Intrusion Prevention System (IDS/IPS), a software feature that is part of the Cisco Self-Defending Network
and is the industry’s first integrated wired and wireless security solution. Cisco Unified IDS/IPS takes a
comprehensive approach to security—at the wireless edge, wired edge, WAN edge, and through the data center.
When an associated client sends malicious traffic through the Cisco Unified Wireless Network, a Cisco wired IDS
device detects the attack and sends shun requests to Cisco wireless LAN controllers, which will then disassociate
the client device.
Autonomous or unified Cisco Aironet 1130AG Series Access Points support management frame protection for the
authentication of 802.11 management frames by the wireless network infrastructure. This allows the network to
detect spoofed frames from access points or malicious users impersonating infrastructure access points. If an
access point detects a malicious attack, an incident will be generated by the access point and reports will be
gathered on the Cisco wireless LAN controller, Cisco WCS, or CiscoWorks WLSE.
Features and Benefits
Table 1 lists features and benefits of Cisco Aironet 1130AG Series access points.
Table 1.
Features and Benefits of Cisco Aironet 1130AG Series Access Points
Feature
Benefit
Dual 802.11a and 802.11g
Radios
Radios
●
Provides up to 108 Mbps of capacity in a single device for industry-leading capacity and backward
compatibility with legacy 802.11b clients.