Dell Wyse Wall Mount Bracket R Class 920315-01L 用户手册

The bracket enables a thin client having the VESA mounting pattern to be mounted on a 
wall or on most VESA compliant mounting surfaces and monitors. Both VESA 75 mm and 
100 mm mounting patterns are supported. The mounting bracket consists of two (2) 
identical pieces. One piece attaches to the mounting surface with user-provided hardware 
that can withstand a force of 35 pounds, and the other piece attaches to the thin client. 
After the bracket pieces are joined with four (4) thumb screws, the thin client is in an 
upright position. Cables can be attached at any convenient time, as long as the power is 
disconnected.

Wyse models that use the Wyse Universal VESA Mount bracket:

Wyse does not recommend mounting Models Rx0L, Rx0LE, or Zx0 on a 
monitor.

When determining location, take into account the cable lengths of the 
monitor, keyboard, mouse, power supply, and peripherals.

Mount the thin client only as indicated; improper orientation (where the back 
panel or front panel is facing down) could inhibit the dissipation of heat from 
the device and damage it.

Leave at least 12.5 mm between the ventilation holes of the thin client and 
any solid surface. An enclosed area must have a minimum of 150 square cm 
of venting for above and below the thin client (a total minimum of 300 square 
cm) to maintain proper ventilation of the thin client.