Cavalry CAUH3701T0 用户手册

As you place the hard drive into the enclosure, watch the retainer  pins on the right side of panel 

A. Once they have lined-up with 

the screw-holes on the side of your HDD, push the back end of  the drive downwards, into the floor of Panel 

A. Do this slowly and 

firmly

, making sure that all of the retainer pins on Panel 

A

 line up 

with the screw-holes  on the HDD.

EN-CA

U

H-B

Use your thumbs to push around the edge of the drive until you  feel that the drive is well-mated with Panel 

A. 

Then, insert the two 

HDD screws into Panel 

A, and beyond until they meet with the 

screw-holes of the HDD. 

You may have to push the drive inwards, 

towards the board on Panel 

A, in order to line the holes up. 

Tighten 

the screws slowly

, but make sure not to indent the plastic. 

Finger

-tight will do.

Screwhole

Screwhole

Retainer Pins