LG 19LE5300 业主指南

PICTURE CONTROL

110

Edge Enhancer

ꔛ

Show clearer and distinctive yet natural edges in of the video.

ꔛ

This function is enabled in "

Picture Mode - Expert".

xvYCC

ꔛ

This is produces richer colors.

ꔛ

This feature represents rich color as much as conventional video signal.

ꔛ

This function is enabled in "

Picture Mode - Cinema, Expert" when a xvYCC

signal is inputted through HDMI.

Color Filter

ꔛ

This function filters specific colors in the video.

You can use the RGB filter to set color saturation and hue accurately.

Expert Pattern

ꔛ

This is a pattern used for expert adjustment.

ꔛ

This function is enabled in "

Picture Mode - Expert" when you watch DTV.

Color Temperature

ꔛ

Adjusts the overall color of the screen by changing the white baseline.

a. Gamma : Select 1.9, 2.2, 2.4

b. Method : 2 Points

- Pattern: Inner, Outer

- Red/Green/Blue Contrast, Red/Green/Blue Brightness:

The adjustment range is -50 - +50.

c. Method : 10 Point IRE

- Pattern: Inner, Outer

- IRE (Institute of Radio Engineers) is the unit to display the size of the video

signal and can be set among 10, 20, 30 - 100. You can adjust Red, Green

or Blue according to each setting.

- Luminance: This function displays calculated luminance value for 2.2

gamma. You can input luminance value you want at 100 IRE, then the

target luminance value for 2.2 gamma is displayed at every 10 steps from

10 IRE to 90 IRE.

- Red/Green/Blue: The adjustment range is -50 - +50.

d. Apply to all inputs

Color Management

System

ꔛ

A tool used by the experts to make adjustments by using the test patterns,

this does not affect other colors but can be used to selectively adjust the

6 color areas (Red/Green/Blue/Cyan/Mgt/Yellow).

Color difference may not be distinctive even when you make the adjust-

ments for the general video.

Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.
- Red/Green/Blue/Yellow/Cyan/Magenta Color: The adjustment range is

-30 - +30.

- Red/Green/Blue/Yellow/Cyan/Magenta Tint: The adjustment range is -30

- +30.

- This feature is disabled in RGB-PC and HDMI-PC mode.