LG LDG5315ST 用户指南

下载
页码 120
41
MAINTENANCE
ENGLISH
MAINTENANCE
CAUTION
 
Do not clean this appliance with bleach.
 
To prevent burns, wait until the cooktop has 
cooled down before touching any of its parts.
 
Always wear gloves when cleaning the cooktop.
Removing and Replacing the 
Gas Surface Burners
Grates and burner heads/caps can be removed for 
care and cleaning.
General burner
Burner cap is properly set.
Burner cap is NOT properly 
set.
Cleaning Burner Heads/Caps
For even and unhampered flame, the slits in the 
burner heads must be kept clean at all times.The 
burner heads and caps (and the oval burner head 
and cap assembly) can be lifted off. Do not attempt to 
remove the oval burner cap.
 
Wash the burner caps in hot soapy water and rinse 
with clean water. Run water through the oval burner 
from the bottom stem to flush out debris.
 
Use care when cleaning the cooktop. The pointed 
metal ends on the electrodes could cause injury. 
Hitting an electrode with a hard object may damage 
it.
 
To remove burnt-on food, soak the burner heads 
in a solution of mild liquid detergent and hot water 
for 20–30 minutes. For stubborn stains, use a 
toothbrush or wire brush.
 
The burners will not operate properly if the burner 
ports or electrodes are clogged or dirty.
 
Burner caps and heads should be cleaned routinely, 
especially after excessive spillover.
 
Burners will not light if the cap is removed.
CAUTION
 
Do not hit the electrodes with anything hard. 
Doing so could damage them.
 
Do not use steel wool or scouring powders to 
clean the burners.
After Cleaning the Burner Heads/
Caps
Shake out any excess water and then let them dry 
thoroughly. Placing the oval burner upside down will 
allow the water to drain out more easily. Replace 
the burner heads and caps over the electrodes on 
the cooktop in the correct locations according to 
their size. Make sure the hole in the burner head is 
positioned over the electrode.