LG DP461A 用户指南

下载
页码 20
6
Power connections
Connecting the Power Cable
Connect the supplied power cable from the unit to a power socket.
AC adapter
•  This AC adapter operates on 100-240V~ 1A 50/60Hz.
•  Contact an electrical parts distributor for assistance in selecting a suitable
AC plug adapter or AC cord set.
•  Manufactured by NANJING WANLIDA TECHNOLOGY CO., LTD
Connect the Automotive adapter
This unit and its automotive adapter are designed for use in vehicles that 
have 8.5-16 volt, negative ground electrical systems. This is standard for most
vehicles. If your vehicle has a different type of electrical system, the DC power 
system cannot be used.
Automotive adapter
•  This automotive adapter operates on DC 8.5-16V.
•  Contact an electrical parts distributor for assistance in selecting a suitable
automotive adapter.
•  Manufactured by NANJING WANLIDA TECHNOLOGY CO., LTD.
Caution 
•  To prevent electrical shock and possible damage to your unit or vehicle,
always unplug the automotive adapter from the cigarette lighter socket 
before you remove the plug from your unit.
•  A 3 amp. 250V fuse for protection is installed in the automotive adapter.
•  While the engine is being started, disconnect the automotive adapter from
the car’s cigarette lighter socket.
•  Do not operate your unit when the car battery is discharged.  
Peak current from the car generator may cause the DC fuse to blow.
•  If the vehicle’s supply voltage drops below approximately 10 volts, your unit
may not work properly.
•  Do not leave your unit in a place where the temperature exceeds 70°C
(158°F), or the pick-up device may be damaged. 
Examples include:  
- Inside a car with the windows closed and in direct sunshine. 
- Near a heating appliance.
G
Plug into the   
“DC 12V IN” jack.
Plug into the car’s 
cigarette lighter  
socket.
Right side of unit
Plug into the  “DC 12V IN” jack.
Plug into a 
power source.
Right side of the unit
DP461A-P.ARUSLLK_2604-ENG.indd   6
11. 09. 28 �� 5:14