LG LAC5810 业主指南
12
CAR CD/MP3/WMA Receiver
Specifications
General
Output Power
Output Power
50W x 4CH (Max.)
Power Source
DC 12V
Speaker impedance
4
Ω
Ground System
Negative
Dimensions (W x H x D)
180 x 50 x 176 mm (Without Control Panel)
Net Weight
1.3 kg
Tuner
FM
Frequency Range
FM
Frequency Range
87.5-107.9, 87.5-108, 65-74 or 87.5-108 MHz
S/N Ratio
55 dB
Distortion 0.7%
Usable Sensitivity
Usable Sensitivity
12 dBµV
AM (MW)
Frequency Range
Frequency Range
520-1720 or 522-1620 kHz
S/N Ratio
50 dB
Distortion
1.0%
Usable Sensitivity
28 dBµV
CD
Frequency Response
Frequency Response
20 Hz-20 kHz
S/N Ratio
80 dB
Distortion
0.12%
Channel Separation (1kHz) 55 dB
AUX
Frequency Response
Frequency Response
20 Hz-20 kHz
S/N Ratio
80 dB
Distortion
0.12 %
Channel Separation (1kHz) 45 dB
Max Input Level (1kHz)
Max Input Level (1kHz)
1.2V (35K
Ω)
USB
Version
Version
1.1
Designs and specifications are subject to change without notice.
P/N : MFL41655333
General setting information
AUX (Auxiliary) ON / OFF
It is possible to use auxiliary equipment with this unit. Activate the auxiliary
setting when using auxiliary equipment connected to this unit.
setting when using auxiliary equipment connected to this unit.
AUX (Auxiliary) 00dB / +6dB
You can adjust the volume level of each source to prevent radical changes
in volume when switching between sources.
You can set to 0 dB or +6 dB. You may be surprised at a loud sound when
you change the source from the external component to another source.
in volume when switching between sources.
You can set to 0 dB or +6 dB. You may be surprised at a loud sound when
you change the source from the external component to another source.
DEMO OFF / ON
You can change the initial indication on the display to information name
(function name, EQ name, etc...) while listen to a source.
(function name, EQ name, etc...) while listen to a source.
LED GRN / RED
You can change the button color. GRN(green) <-> RED(red)
BEEP 2ND / ALL
BEEP 2ND : The beep is generated when a key is long pressed. (1 sec)
BEEP ALL : The beep is generated when any key is pressed.
BEEP ALL : The beep is generated when any key is pressed.