Finisar FTLX8571D3BCV 用户手册
© Finisar Corporation -March 2009
Rev. B
Page 1
Product Specification
RoHS-6 Compliant
1G/10G 850nm Multimode Datacom SFP+ Transceiver
FTLX8571D3BCV
PRODUCT FEATURES
• Hot-pluggable SFP+ footprint
• Supports rate selectable 1.25 Gb/s
• Supports rate selectable 1.25 Gb/s
or 9.95 to 10.3 Gb/s bit rates
• Power dissipation < 1W
• RoHS-6 compliant (lead-free)
• Commercial temperature range
• RoHS-6 compliant (lead-free)
• Commercial temperature range
0°C to 70°C
• Single 3.3Vpower supply
• Maximum link length of 300m on
• Maximum link length of 300m on
2000 MHZ-km MMF
• Uncooled 850nm VCSEL laser
• Receiver limiting electrical
• Receiver limiting electrical
interface
• Duplex LC connector
• Built-in digital diagnostic functions
• Built-in digital diagnostic functions
.
APPLICATIONS
• 1000BASE-SX 1G Ethernet
• 10GBASE-SR/SW 10G Ethernet
• 10GBASE-SR/SW 10G Ethernet
Finisar’s FTLX8571D3BCV 1G/10G Dual-Rate SFP+ transceivers are designed for use
in 1-Gigabit and 10-Gigabit Ethernet links over multimode fiber. They are compliant
with SFF-8431
in 1-Gigabit and 10-Gigabit Ethernet links over multimode fiber. They are compliant
with SFF-8431
1
, IEEE 802.3-2005 10GBASE-SR/SW
2
and 1000BASE-SX
3
. Digital
diagnostics functions are available via a 2-wire serial interface, as specified in SFF-
8472
8472
4
. The FTLX8571D3BCV is a “limiting module”, i.e., it employs a limiting
receiver. Host board designers using an EDC PHY IC should follow the IC
manufacturer’s recommended settings for interoperability with an SFP+ limiting module.
This product is for applications specifically designed for 10G SFP+ ports and 1G/10G
SFP+ ports and not native 1G SFP ports. The transceiver is RoHS compliant and lead
free per Directive 2002/95/EC
manufacturer’s recommended settings for interoperability with an SFP+ limiting module.
This product is for applications specifically designed for 10G SFP+ ports and 1G/10G
SFP+ ports and not native 1G SFP ports. The transceiver is RoHS compliant and lead
free per Directive 2002/95/EC
5
, and Finisar Application Note AN-2038
6
.
PRODUCT SELECTION
FTLX8571D3BCV