Perle SPEED1 LE Express 04003140 用户手册

 

Page 24

Chapter 2 Installing Drivers and Host Cards

1. Log in to the LINUX system as root user. 

2. At the LINUX prompt, copy the supplied perle-serial-<version>-<release>.src.rpm file 

onto your system in the /tmp directory.

3. Install the source rpm by typing the following command:

4. Build the binary RPM package for your system by entering the following commands:

5. Install the binary RPM which was just created. Enter the following commands:

The <arch> value is the architecture of your LINUX machine such as “i386” or “alpha”.

1. Log in to the LINUX system as root user. 

2. At the LINUX prompt, copy the supplied perle-serial .tgz file onto your system in the /tmp 

directory.

3. Unpack the file using the command:

4. Build and install the perle-serial software by entering the following commands:

Notes:
The <packages directory> path name in the following instructions will be different 
depending on the LINUX distribution you have installed. ( i.e. Redhat will have a 
“redhat” directory; Suse will have a “packages” directory)

The <rpm build command> will change depending on the version of the RPM utilities 
installed. For newer versions (i.e. 4.2) , the <rpm build command> is “rpmbuild”. For 
older versions use “rpm”.