Viewsonic PJD5232 用户手册
37
To activate the High Altitude Mode:
1.
1.
Press MENU/EXIT on the projector or Menu on
the remote control and then press
/
until the
SYSTEM SETTING: ADVANCED menu is
highlighted.
highlighted.
2.
Press
to
highlight
High Altitude Mode and
press /
to
select
On. A confirmation
message is displayed.
3.
Highlight Yes and press MODE/ENTER on the projector or Enter on the remote
control.
control.
Operation under "High Altitude Mode" may cause a higher decibel operating noise level
because of increased fan speed necessary to improve overall system cooling and
performance.
because of increased fan speed necessary to improve overall system cooling and
performance.
If you use this projector under other extreme conditions excluding the above, it may display
auto shut-down symptoms, which is designed to protect your projector from over-heating.
In cases like this, you should switch to High Altitude Mode to solve these symptoms.
However, this is not to state that this projector can operate under any and all harsh or
extreme conditions.
auto shut-down symptoms, which is designed to protect your projector from over-heating.
In cases like this, you should switch to High Altitude Mode to solve these symptoms.
However, this is not to state that this projector can operate under any and all harsh or
extreme conditions.
Using the CEC function
This projector supports CEC (Consumer Electronics Control) function for synchronized
power on/off operation via HDMI connection. That is, if a device that also supports CEC
function is connected to the HDMI input of the projector, when the projector’s power is
turned on or off, the power of the connected device will also be turned on or off
automatically (and vice versa).
power on/off operation via HDMI connection. That is, if a device that also supports CEC
function is connected to the HDMI input of the projector, when the projector’s power is
turned on or off, the power of the connected device will also be turned on or off
automatically (and vice versa).
To turn on the CEC function:
1.
Press MENU/EXIT on the projector or Menu on the remote control to open the On-
Screen Display (OSD) menu.
Screen Display (OSD) menu.
2.
Go to the SYSTEM SETTING: BASIC > CEC menu.
3.
Press
/
to select On.
•
In order for the CEC function to work properly, make sure that the device is correctly
connected to the HDMI input of the projector via a HDMI cable, and its CEC function is
turned on.
connected to the HDMI input of the projector via a HDMI cable, and its CEC function is
turned on.
•
Depending on the connected device, the CEC function may not work.
Using the 3D functions
This projector features 3D function which enables you to enjoy 3D movies, videos, and
sporting events in a more realistic way by presenting the depth of the images. You need to
wear a pair of 3D glasses to view 3D images.
sporting events in a more realistic way by presenting the depth of the images. You need to
wear a pair of 3D glasses to view 3D images.
If the 3D signal is input from an HDMI 1.4a compatible device, the projector detects the
signal for 3D Sync information and once detected, it projects images in 3D format
automatically. In other cases, you may need to manually select a 3D Sync format for the
projector to project 3D images correctly.
signal for 3D Sync information and once detected, it projects images in 3D format
automatically. In other cases, you may need to manually select a 3D Sync format for the
projector to project 3D images correctly.
To select a 3D Sync format:
1.
Press MENU/EXIT on the projector or Menu on the remote control and then press
/
until the DISPLAY menu is highlighted.
We recommend you use the High Altitude
mode by selecting it whenever your
environment is higher than 1500 m.
mode by selecting it whenever your
environment is higher than 1500 m.
Yes
No
Notice
Do you want to turn High Altitude
Mode ON?
Mode ON?