Sony FIU-900 手册
Chapter 8: SecureSuite System Settings
SecureSuite XS Workstation Guide
67
Port Settings
Changing a port from
0
(which allows the use of any available port) to another port
allows SecureSuite to function over a firewall or similar security component.
The
Server TCP Port Setting
allows an administrator to specify which TCP
port the server will use to receive messages from client machines during the ping
process.
process.
The
RPC Port Settings
allow an administrator to specify which ports will be
used in order to ensure proper RPC communication.
Port 1
specifies which port
the client machine will use to call CSS functions from the server.
Port 2
specifies which port the client machine will use to call LAS functions from the
server.
server.
Timeouts
The
Ping Timeout
value specifies the amount of time (in seconds) that a client
machine will wait for a response from the server during the ping process. For
example, if this is set at
example, if this is set at
10
seconds, then when the client is attempting to ping the
server, the client machine will wait for 10 seconds before returning a message
stating that the server could not be found. Increasing this setting will allow the
client machine more time to wait for a response from the server.
stating that the server could not be found. Increasing this setting will allow the
client machine more time to wait for a response from the server.
The
Discovery Timeout
value specifies how long a client will search for the
server during the discovery process. If a domain is a LAN (as opposed to a WAN),
this value can be as little as
this value can be as little as
5
to
10
seconds. For more geographically abundant
networks, the default value should be left as is, or increased if you are having
problems with clients detecting available SecureSuite servers.
problems with clients detecting available SecureSuite servers.
Virtual IP
When the server is protected by a firewall and one or more client machines are
outside of the firewall, it may be necessary to specify the server’s IP address in
order to ensure successful communication. The
outside of the firewall, it may be necessary to specify the server’s IP address in
order to ensure successful communication. The
Virtual IP
setting allows an
administrator to specify the IP address.