Sony HT-CT80 手册
27
GB
Addit
ional I
n
fo
rm
at
ion
at
ion
Specifications
Amplifier section
U.S. models:
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(FTC)
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(FTC)
Front L + Front R:
With 4 ohms loads, both channels
driven, from 200 Hz - 20,000 Hz; rated
12 Watts per channel minimum RMS
power, with no more than 1% total
harmonic distortion from
250 milliwatts to rated output.
With 4 ohms loads, both channels
driven, from 200 Hz - 20,000 Hz; rated
12 Watts per channel minimum RMS
power, with no more than 1% total
harmonic distortion from
250 milliwatts to rated output.
POWER OUTPUT (reference)
Front L/Front R:
20 Watts (per channel at 4 ohms,
1 kHz)
20 Watts (per channel at 4 ohms,
1 kHz)
Canadian models:
POWER OUTPUT (rated)
POWER OUTPUT (rated)
Front L + Front R:
12 W + 12 W (at 4 ohms, 1 kHz, 1% THD)
12 W + 12 W (at 4 ohms, 1 kHz, 1% THD)
POWER OUTPUT (reference)
Front L/Front R:
20 W (per channel at 4 ohms, 1 kHz)
20 W (per channel at 4 ohms, 1 kHz)
Subwoofer amplifier section
POWER OUTPUT (reference)
40 W (at 8 ohms, 100 Hz)
Inputs
OPTICAL
ANALOG
ANALOG
USB Section
(USB) port
Type A
BLUETOOTH section
Communication system
BLUETOOTH Specification version 4.0
Output
BLUETOOTH Specification Power Class
2
2
Maximum communication range
Line of sight approx. 10 m (33 ft)
1)
Maximum number of devices to be
registered
8 devices
8 devices
Frequency band
2.4 GHz band (2.4000 GHz -
2.4835 GHz)
2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH profiles
2)
A2DP (Advanced Audio Distribution
Profile)
Profile)
Supported Codecs
3)
SBC
4)
Transmission range (A2DP)
20 Hz - 20,000 Hz (Sampling frequency
44.1 kHz)
44.1 kHz)
1)
The actual range will vary depending on
factors such as obstacles between
devices, magnetic fields around a
microwave oven, static electricity,
cordless phone, reception sensitivity,
operating system, software application,
etc.
factors such as obstacles between
devices, magnetic fields around a
microwave oven, static electricity,
cordless phone, reception sensitivity,
operating system, software application,
etc.
2)
BLUETOOTH standard profiles indicate
the purpose of BLUETOOTH
communication between devices.
the purpose of BLUETOOTH
communication between devices.
3)
Codec: Audio signal compression and
conversion format
conversion format
4)
Subband Codec
Speakers
Front L/Front R speaker section
Speaker system
2-way speaker system, Acoustic
suspension
suspension
Speaker
Tweeter: 14 mm - 25 mm (
9
/
16
in - 1 in)
balance dome type
Woofer: 35 mm × 120 mm (1
Woofer: 35 mm × 120 mm (1
7
/
16
in ×
4
3
/
4
in) cone type
General
Power requirements
120 V AC, 60 Hz
Power consumption
On: 21 W
Standby mode: 0.5 W or less
Standby mode: 0.5 W or less
Dimensions (approx.) (w/h/d)
901 mm × 52 mm × 84 mm
(35
(35
1
/
2
in × 2
1
/
8
in × 3
3
/
8
in)
Mass (approx.)
2 kg (4 lb 7 oz)
Bar Speaker (SA-CT80)