Sony PS-LX350H 手册
4
6
Insert the headshell into the front of the tone arm.
Turn the locking collar in the direction of the
arrow until the headshell is secure.
Turn the locking collar in the direction of the
arrow until the headshell is secure.
7
Insert the hinges on the dust cover into the hinge
pockets on the rear of the cabinet.
pockets on the rear of the cabinet.
3
4
7
5
6
1
2
Assembling the Turntable
1
If your turntable is equipped with a voltage
selector, be sure to set the selector to your line
voltage.
selector, be sure to set the selector to your line
voltage.
2
Carefully, place the platter on the spindle.
3
Using the ribbon, loop the drive belt around the
motor pully. After looping the belt, do not forget
to remove the ribbon.
motor pully. After looping the belt, do not forget
to remove the ribbon.
4
Place the rubber mat on the platter.
5
Slide the counter weight onto the shaft at the rear
of the tone arm and turn 3 or 4 times in the
direction of the arrow.
of the tone arm and turn 3 or 4 times in the
direction of the arrow.
Getting Started
110V·120V
220V·240V