Sony MHC-EC919IP 手册
28
GB
MHC-EC919iP/EC719iP.4-467-786-22(1)
To change the AM tuning interval
(except for European model)
(except for European model)
The AM tuning interval is preset to
9 kHz or 10 kHz by factory default. Use
buttons on the unit to change the AM
tuning interval.
1
Tune to any AM station.
2
Hold down OPTIONS on the unit
until “530” or “531” appears on the
display.
All the AM preset stations are
until “530” or “531” appears on the
display.
All the AM preset stations are
erased.
To reset the system to factory
settings
settings
If the system still does not operate
properly, reset the system to factory
settings.
1
Disconnect and reconnect the
power cord, and then turn on the
system.
power cord, and then turn on the
system.
2
Hold down
and EQ on the unit
until “RESET OK” appears.
All user-configured settings, such
All user-configured settings, such
as preset radio stations, timer, and
the clock, are deleted.
To turn off the automatic standby
function
function
This system is equipped with an
automatic standby function. With this
function, the system enters standby
mode automatically in about 30
minutes when there is no operation or
audio signal output.
By default, the automatic standby
function is turned on.
Use buttons on the unit to turn off the
automatic standby function.
Hold down
while the system
is on, until “AUTO STANDBY OFF”
appears.
To turn on the function, repeat the
appears.
To turn on the function, repeat the
procedure until “AUTO STANDBY
ON” appears.
Notes
The automatic standby function is invalid
for the tuner function (FM/AM).
The system may not enter standby mode
automatically in the following cases:
when an audio signal is detected.
when an iPod/iPhone is connected.
during playback of audio tracks or files.
while the preset Play Timer or Sleep
when an audio signal is detected.
when an iPod/iPhone is connected.
during playback of audio tracks or files.
while the preset Play Timer or Sleep
Timer is in process.