Sony KDL-46SL140 手册

Gently slide the TV unit onto the neck of the 
Table-Top Stand and align the screws holes.

~

• When you carry the TV unit, place your hand as 
illustrated on page 5 and hold it securely. Do not put 
stress on the LCD panel or the frame around the 
screen.
• Be careful to not pinch your hands or the AC 
power cord when installing the TV unit onto the 
Table-Top Stand.

Use the supplied screws to attach the TV unit 
to the Table-Top Stand (refer to the “Attaching 
the Table-Top Stand” flyer).

~

•If you use an electric screwdriver, set the torque for 
tightening at approximately 1.5 N·m {15Kgf·cm}.

Sony strongly recommends taking 
measures to prevent the TV from toppling 
over. Unsecured TVs may topple and result 
in property damage, serious bodily injury 
or even death.

Prevent the TV from Toppling
s

Secure the TV to a wall and/or stand.

s

Do not allow children to play or climb on 
furniture and TV sets.

s

Avoid placing or hanging items on the TV.

s

Never install the TV on:

• slippery, unstable and/or uneven surfaces.
• furniture that can easily be used as steps, such 

as a chest of drawers.

s

Install the TV where it cannot be pulled, 
pushed, or knocked over.

s

Route all AC power cords and connecting 
cables so that they are not accessible to 
children.

Use a Sony specified TV stand (see page 2) and 
follow the instruction manual provided with the 
Sony TV stand.

If a Sony specified TV stand is not used, consider 
the following recommended measures.

Secure the stand for the TV.

Make sure the TV stand can adequately support the 
weight of the TV. Use two angle braces (not 
supplied) to secure the stand.
For each angle brace use the appropriate hardware 
to:

• Attach one side of the angle brace to the wall stud.
• Attach the other side to the TV stand.

Stand

Angle brace