Sony STR-K7000 手册
77
US
C:\Documents and
Settings\pc13\Desktop\J9052007_2662265111HT7000DH_US\2662265111\US07REM_HT-
7000DH-U.fm
Settings\pc13\Desktop\J9052007_2662265111HT7000DH_US\2662265111\US07REM_HT-
7000DH-U.fm
masterpage: Right
HT-8000MH
2-662-265-11 (1)
Ad
dition
dition
al I
n
n
fo
rm
atio
n
Radio stations cannot be tuned in.
• Check that the antennas are connected
securely. Adjust the antennas and connect
an external antenna, if necessary.
an external antenna, if necessary.
• The signal strength of the stations is too
weak (when tuning in with automatic
tuning). Use direct tuning.
tuning). Use direct tuning.
• Make sure you set the tuning interval
correctly (when tuning in AM stations
with direct tuning).
with direct tuning).
• No stations have been preset or the preset
stations have been cleared (when tuning by
scanning preset stations). Preset the
stations (page 61).
scanning preset stations). Preset the
stations (page 61).
• Press DISPLAY repeatedly on the receiver
so that the frequency appears on the
display.
display.
There is no picture or an unclear
picture appears on the TV screen or
monitor.
picture appears on the TV screen or
monitor.
• Select the appropriate input using the input
buttons.
• Set your TV to the appropriate input mode.
• Move your audio components away from
• Move your audio components away from
the TV.
• Assign the component video input
correctly.
The MULTI CHANNNEL DECODING
lamp does not light up in blue.
lamp does not light up in blue.
• Check that the playback component is
connected to a digital jack and the input is
selected properly on this receiver.
selected properly on this receiver.
• Check whether the input source of the
software being played back corresponds to
the multi channel format.
the multi channel format.
• Check whether the setup on the playback
component is set to multi channel sound.
The source image input to the HDMI
jack on the receiver is not output from
the TV.
jack on the receiver is not output from
the TV.
• Check the HDMI connection.
• Depending on the playback component,
• Depending on the playback component,
you may need to set up the component.
Refer to the operating instructions
supplied with the each component.
Refer to the operating instructions
supplied with the each component.
• Assign the HDMI input correctly.
Remote control
The remote does not function.
• Point the remote at the remote sensor on
the receiver.
• Remove any obstacles in the path between
the remote and the receiver.
• Replace all the batteries in the remote with
new ones, if they are weak.
• Make sure you select the correct input on
the remote.
• The 12 button on the remote is not
available for receiver operation.
continued
US01COV_HT-7000DH-U.book Page 77 Wednesday, January 25, 2006 3:30 PM