Sony STR-KG700 手册
43
US
O
ther O
p
e
ra
tions
To create an index name
1
Use
V/v/B/b to create an index name.
Press
V/v to select a character, then press
B/b to move the cursor to the next position.
If you made a mistake
Press
B/b until the character you want to
change flashes, then press
V/v to select the
correct character.
Tips
• You can select the character type as follows by
pressing
V/v.
Alphabet (upper case)
t Numbers t
Symbols
• To enter a blank space, press
b
without
selecting a character.
2
Press
to enter the name.
The entered name is registered.
Switching between
digital and analog audio
digital and analog audio
(INPUT MODE)
You can select the audio input mode setting
when you connect components to both digital
and analog audio input jacks on the receiver.
when you connect components to both digital
and analog audio input jacks on the receiver.
1
Turn INPUT SELECTOR on the
receiver to select the input.
receiver to select the input.
You can also use the input buttons on the
remote.
remote.
2
Press INPUT MODE repeatedly
on the receiver to select the
audio input mode.
on the receiver to select the
audio input mode.
The selected audio input mode appears on
the display.
the display.
Audio input modes
x AUTO
Gives priority to digital audio signals when
there are both digital and analog connections.
If there are no digital audio signals, analog
audio signals are selected.
there are both digital and analog connections.
If there are no digital audio signals, analog
audio signals are selected.
x ANALOG
Specifies the analog audio signals input to the
AUDIO IN (L/R) jacks.
AUDIO IN (L/R) jacks.
Note
Some audio input modes may not be set up
depending on the input.
depending on the input.
Other Operations