Sony XDP-PK1000 规格指南
AMP & General Feature
Automatic Level Optimizer
Yes
Bass/Treble
Bass: +/- 7 dB @ 100HZ, Treble: +/- 7 dB @ 7 kHz
Low Pass Filter
Amplifier: Fixed LPF @ 120 Hz., 12 dB/Oct.
Output Power (4ohm, 1kHz,16V)(W)
DSP Unit: 45 watts x 4 at 4 ohms
Amplifier: 600 watts x 1 at 4 ohms
Amplifier: 600 watts x 1 at 4 ohms
Pre Out
(3) Front, Rear and Sub
Time Alignment Custom
Yes (Adjustment)
Time Alignment Preset
Yes
Audio
Impedance
Subwoofer: 4 Ohms
Preout Impedance
220 ohms
Preout Voltage
2 volt
S/N Ratio
Audio Power:
DSP unit: S/N 80 dBA
Amplifier: 65 dBA
DSP unit: S/N 80 dBA
Amplifier: 65 dBA
Convenience Features
Key Illumination
White
General
Magnet
Subwoofer: Ferrite
Material
Subwoofer: Polypropylene cone
CEA2006 output power
DSP: 17W RMS @ 4 Ohms, 20Hz-20kHz, 1% THD+N
Amplifier: 300W RMS @ 4 Ohms, 20Hz-100Hz, 1% THD+N
Amplifier: 300W RMS @ 4 Ohms, 20Hz-100Hz, 1% THD+N
CEA2006 S/N
DSP unit: S/N 80 dBA
Amplifier: 65 dBA
Amplifier: 65 dBA
Dimensions (WxHxD) (mm)
DSP: 8.375 x 1.625 x 6.125 inches
Amplifier: 14.125 x 2.25 x 11 inches
Amplifier: 14.125 x 2.25 x 11 inches
Maximum output power (4ohm, 1kHz, 16V)(W)
DSP Unit: 45 watts x 4 at 4 ohms
Amplifier: 600 watts x 1 at 4 ohms
Amplifier: 600 watts x 1 at 4 ohms
Mounting dimensions (WxHxD)(mm)
DSP: 210.6 x 40 x 156.6
Amplifier: 356.8 x 55 x 276.8
Amplifier: 356.8 x 55 x 276.8
Preout impedance (ohms)
220
Preout output level (V)
2
Inputs and Outputs
12V Trigger Output(s)
Power amplifier turn on
Audio In
High Level input connector
Digital Audio Input(s)
This unit can be connected to the following iPods. Update your iPod to the latest software before you
use it.
iPod Touch 3rd - 4th generation
iPhone 3GS
iPhone 4
iPod Touch 3rd - 4th generation
iPhone 3GS
iPhone 4
If you have any questions or problems concerning your unit that are not covered in the owners
manual, consult your nearest Sony dealer.
RCA Audio Output(s)
Front, Rear and Subwoofer RCA pre-amp outputs
Other Features
Card Remote ( ): Option
RM-X251
Weights and Measurements