Sony CDX-GT40UW 手册
14
Optimizing sound by Time
Alignment — Listening
Position
Alignment — Listening
Position
The unit can simulate a natural sound field
by delaying the sound output from each
speaker to suit your position.
The options for “POSITION” are indicated
below.
by delaying the sound output from each
speaker to suit your position.
The options for “POSITION” are indicated
below.
You can also set the approximate subwoofer
position from your listening position if:
– the audio output is set to “SUB-OUT”
position from your listening position if:
– the audio output is set to “SUB-OUT”
– the listening position is set besides “OFF.”
The options for “SET SW POS” are
indicated below.
NEAR
indicated below.
NEAR
(
): Near
NORMAL
(
): Normal
FAR
(
): Far
1
During reception/playback, press the
select button.
select button.
2
Rotate the control dial until “SET
POSITION” appears, then press it.
POSITION” appears, then press it.
3
Rotate the control dial to select from
“FRONT L,” “FRONT R,” “FRONT” or
“ALL,” then press it.
“FRONT L,” “FRONT R,” “FRONT” or
“ALL,” then press it.
4
Rotate the control dial until “SET SW
POS” appears, then press it.
POS” appears, then press it.
5
Rotate the control dial to select the
subwoofer position from “NEAR,”
“NORMAL” or “FAR,” then press it.
subwoofer position from “NEAR,”
“NORMAL” or “FAR,” then press it.
6
Press
(BACK).
To cancel listening position, select “OFF”
on step 3.
on step 3.
Adjusting the listening
position
position
You can fine-tune the listening position
setting.
setting.
1
During reception/playback, press the
select button.
select button.
2
Rotate the control dial until “ADJ
POSITION” appears, then press it.
POSITION” appears, then press it.
3
Rotate the control dial to adjust the
listening position, then press it.
Adjustable range: “+3” – “CENTER” –
“–3.”
listening position, then press it.
Adjustable range: “+3” – “CENTER” –
“–3.”
4
Press
(BACK).
DM+ Advanced
DM+ Advanced improves digitally
compressed sound by restoring high
frequencies lost in the compression process.
compressed sound by restoring high
frequencies lost in the compression process.
1
During playback, press the select
button.
button.
2
Rotate the control dial until “DM+”
appears, then press it.
appears, then press it.
3
Rotate the control dial to select “ON,”
then press it.
then press it.
4
Press
(BACK).
Tip
The DM+ setting can be memorized for each
source.
source.
FRONT L
(
): Front left
FRONT R
(
): Front right
FRONT
(
): Center front
ALL
(
): In the center of
your car
OFF
OFF
: No position set