Sony XAV70BT 手册
23
Configuring audio settings
Note
Discs in DTS format are not supported. The sound is
not output if the DTS format is selected.
Discs in DTS format are not supported. The sound is
not output if the DTS format is selected.
Changing the audio language/
format
format
The audio language can be changed if the disc is
recorded with multilingual tracks. You can also
change the audio format when playing a disc
recorded in multiple audio formats (e.g., Dolby
Digital).
recorded with multilingual tracks. You can also
change the audio format when playing a disc
recorded in multiple audio formats (e.g., Dolby
Digital).
1
During playback, touch “DVD Control.”
2
Touch “Audio” repeatedly until the
desired audio language/format
appears.
desired audio language/format
appears.
The audio language switches among the
available languages.
When the 4-digit input prompt appears, input
the language code (page 69) for the desired
language.
When the same language is displayed two or
more times, the disc is recorded in multiple
audio formats.
available languages.
When the 4-digit input prompt appears, input
the language code (page 69) for the desired
language.
When the same language is displayed two or
more times, the disc is recorded in multiple
audio formats.
* The format name and channel numbers appear as
follows.
Example: Dolby Digital 5.1 ch
Example: Dolby Digital 5.1 ch
To close the DVD control menu, touch “DVD
Control.”
Control.”
Changing the audio channel
When playing VCD/CD/MP3/WMA/AAC/
MPEG-4, you can select the right or left channel
sound to listen through both right and left
speakers.
The options are indicated below.
MPEG-4, you can select the right or left channel
sound to listen through both right and left
speakers.
The options are indicated below.
“2-Ch”: Standard stereo sound (default)
“L-Ch”: Left channel sound (monaural)
“R-Ch”: Right channel sound (monaural)
“L-Ch”: Left channel sound (monaural)
“R-Ch”: Right channel sound (monaural)
For VCD/CD/MP3/WMA/AAC
1
During playback, touch “Play Menu,”
then “Stereo” repeatedly until the
desired audio channel appears.
then “Stereo” repeatedly until the
desired audio channel appears.
For MPEG-4
1
During playback, touch “Play Menu,”
then “Audio” repeatedly until the
desired audio channel appears.
then “Audio” repeatedly until the
desired audio channel appears.
To close the play menu, touch “Play Menu.”
Note
You may not be able to change the audio setting
depending on the disc.
You may not be able to change the audio setting
depending on the disc.
Tip
The operation by the card remote commander
(pressing (AUDIO) repeatedly) is also available.
The operation by the card remote commander
(pressing (AUDIO) repeatedly) is also available.
Adjusting the audio output level
— Dolby D level
— Dolby D level
You can adjust the audio output level for a DVD
recorded in Dolby Digital format, to reduce the
volume level differences between disc and
source.
recorded in Dolby Digital format, to reduce the
volume level differences between disc and
source.
1
During playback, touch “Play Menu.”
2
Touch the “Adjust” box to set to “ON.”
3
Touch –/+ repeatedly to adjust the
output level.
The output level is adjustable in single steps,
between –10 and +10.
output level.
The output level is adjustable in single steps,
between –10 and +10.
To close the play menu, touch “Play Menu.”
ATT
DVD
Control
Top
12:00
15
Source List
Audio
Subtitle
Angle
Menu
Top Menu
Audio 1: English Dolby D 3/2.1
Play Menu
SHUF
Audio language
Audio format/channel numbers*
Dolby D 3 / 2
.
1
Rear component × 2
Front component × 2 +
Center component × 1
Center component × 1
LFE component × 1
MPEG-4