Sony MVC-CD500 手册
51
Adv
a
nced
st
ill
ill
i
m
age
sh
oot
oot
in
g
a
Set the mode dial to P, S, A, M,
SCN, or
SCN, or
.
b
Press FOCUS to switch to
focus preset.
focus preset.
Each time you press FOCUS, the
setting changes in the following order.
Focus preset
setting changes in the following order.
Focus preset
Y
AF range finder frame select
The focus is fixed and the 9 (manual
focus) indicator appears.
focus) indicator appears.
c
Turn the jog dial to select the
desired focus setting.
desired focus setting.
You can select from the following
distance settings: (Units: m)
0.1, 0.2, 0.3, 0.5, 0.8, 1.0, 1.5, 2.0, 3.0,
5.0, 7.0, 10, 15, and
distance settings: (Units: m)
0.1, 0.2, 0.3, 0.5, 0.8, 1.0, 1.5, 2.0, 3.0,
5.0, 7.0, 10, 15, and
∞ (infinity)
To reactivate auto focusing
Press FOCUS again so that the focus setting
information disappears.
information disappears.
•
Focus setting information is approximate, and
should be used as a reference.
should be used as a reference.
•
If you point the lens up or down, the error will
increase.
increase.
•
When you select 0.1 m (4 inches) with the
zoom set to the T side, you may not get a clear
focus. In such cases, the focus setting
information flashes. Press the zoom W button
until the indicator stops flashing.
zoom set to the T side, you may not get a clear
focus. In such cases, the focus setting
information flashes. Press the zoom W button
until the indicator stops flashing.
•
The focus preset does not work properly when
attaching a conversion lens (not supplied).
attaching a conversion lens (not supplied).
Adjusting the
exposure
exposure
— EV adjustment
Mode dial: P/S/A/SCN/
This lets you adjust the exposure value
which is set by automatic adjustment. You
can select values ranging from +2.0EV to
–2.0EV in steps of 1/3EV.
which is set by automatic adjustment. You
can select values ranging from +2.0EV to
–2.0EV in steps of 1/3EV.
Mode dial
Jog dial
DISPLAY/LCD BACK LIGHT ON/OFF