Sony VGN-FZ490 手册

 

 

2/2

 

 

 

 

 

Step 4. Using the enclosed magnetic 
screwdriver, loosen the one screw 
securing the hard disk drive access 
cover. 

Step 5. To remove the HDD access 
cover, start by lifting from the side where 
the screw held it in place. 

Step 6. Using the enclosed magnetic 
screwdriver, remove the three (3) 
screws securing the HDD assembly. 

 

 

 

 

 

 

 
Step 7. Carefully pull the clear plastic 
tab towards you to detach the HDD 
from the connector. 

 
Step 8. Replace the old HDD assembly 
with the new one. Hold the HDD on the 
sides to avoid damaging the part. 

 
Step 9. Attach the HDD assembly to 
the HDD connector. Make sure the 
screw holes are aligned correctly. 

 
 
 

 

 

Step 12. Reinstall the battery pack and 
reconnect the AC Adaptor. 
 
Power on your computer and continue 
with the recovery process by following 
the instructions described on the back 
of the recovery disk’s case. 
 
Return the old HDD to Sony following 
the included shipping instructions. 

Step 10. Re-install the three (3) screws 
securing the HDD assembly in place. 

Step 11. Re-install the HDD cover. 

 

 

Lift To Remove