D-Link DFL-1000 用户手册
DFL-1000 User Manual
107
Connecting to the PPTP VPN
• Start the dialup connection that you configured in the previous procedure.
• Enter your PPTP VPN User Name and Password.
• Select Connect.
• In the connect window, enter the User Name and Password that you use to connect to your dialup
• Enter your PPTP VPN User Name and Password.
• Select Connect.
• In the connect window, enter the User Name and Password that you use to connect to your dialup
network connection.
This user name and password is not the same as your VPN user name and password.
Configuring a Windows XP client for PPTP
Use the following procedure to configure a client computer running Windows XP so that it can connect to
a DFL-1000 PPTP VPN.
a DFL-1000 PPTP VPN.
Configuring a PPTP dialup connection
• Go to Start > Control Panel .
• Select Network and Internet Connections.
• Select Create a Connection to the network of your workplace and select Next.
• Select Virtual Private Network Connection and select Next.
• Name the connection and select Next.
• If the Public Network dialog box appears, choose the appropriate initial connection and select Next.
• In the VPN Server Selection dialog, enter the IP address or host name of the DFL-1000 NPG to
• Select Network and Internet Connections.
• Select Create a Connection to the network of your workplace and select Next.
• Select Virtual Private Network Connection and select Next.
• Name the connection and select Next.
• If the Public Network dialog box appears, choose the appropriate initial connection and select Next.
• In the VPN Server Selection dialog, enter the IP address or host name of the DFL-1000 NPG to
connect to and select Next.
• Select Finish.
Configuring the VPN connection
• Right-click the Connection icon that you created in the previous procedure.
• Select Properties > Security .
• Select Typical to configure typical settings.
• Select Require data encryption.
• Select Properties > Security .
• Select Typical to configure typical settings.
• Select Require data encryption.
If a RADIUS server is used for authentication do not select Require data encryption. PPTP encryption is not
supported for RADIUS server authentication.
supported for RADIUS server authentication.
• Select Advanced to configure advanced settings.
• Select Settings.
• Select Challenge Handshake Authentication Protocol (CHAP).
• Make sure that none of the other settings are selected.
• Select the Networking tab.
• Make sure that the following options are selected:
• Select Settings.
• Select Challenge Handshake Authentication Protocol (CHAP).
• Make sure that none of the other settings are selected.
• Select the Networking tab.
• Make sure that the following options are selected:
TCP/IP
QoS Packet Scheduler
• Make sure that the following options are not selected:
File and Printer Sharing for Microsoft Networks
Client for Microsoft Networks
• Select OK.