D-Link DAS-3216_revB 用户手册
DAS3 Series Operation Menus
39
Table 4-14
IGMP Snooping Dialog Description
Item
Description
IGMP Snooping Leave message processing mode for the port.
If the mode is set to 'Normal', the Leave message is forwarded to the Querier
and then based on the Query received from Querier the Leave processing is
triggered.
If the mode is set to 'Fast', the port is immediately deleted from that multicast
group on Leave message reception and then the Leave message is forwarded.
The mode should be set to 'Fast' for a port only if there is one host behind the
port. This is because if there are multiple hosts behind the port then it will lead
to traffic disruption for other hosts who might still be listening to that multicast
group.
If mode is set to 'FastNormal', the Leave message is forwarded and the Leave
processing is triggered immediately without waiting for any trigger from the
Querier. 'FastNormal' mode thus saves the delay (equal to the time taken for
Leave message to reach router and Querier processing time for it and the time
taken for Query to reach IGMP Snoop module) in Leave processing.
If the mode is set to 'Normal', the Leave message is forwarded to the Querier
and then based on the Query received from Querier the Leave processing is
triggered.
If the mode is set to 'Fast', the port is immediately deleted from that multicast
group on Leave message reception and then the Leave message is forwarded.
The mode should be set to 'Fast' for a port only if there is one host behind the
port. This is because if there are multiple hosts behind the port then it will lead
to traffic disruption for other hosts who might still be listening to that multicast
group.
If mode is set to 'FastNormal', the Leave message is forwarded and the Leave
processing is triggered immediately without waiting for any trigger from the
Querier. 'FastNormal' mode thus saves the delay (equal to the time taken for
Leave message to reach router and Querier processing time for it and the time
taken for Query to reach IGMP Snoop module) in Leave processing.
Leave Mode
Press
the
‘Commit’ button to confirm the setting.
Press
the
‘Modify’ button to change the setting.
Click ‘Modify’ to change the setting of IGMP Snooping for the whole system and individual port.
Figure 4-23 shows the dialog to enable/disable IGMP Snooping feature.
Figure 4-24
Modify IGMP Snooping Status Dialog
AMS
Software Specification and Introduction Guide
Software Specification and Introduction Guide