KitchenAid 30-Inch 4-Element Induction Slide-In Convection Range with Baking Drawer 使用和维护

Electronic Oven Controls

Control Display

The display will flash when powered up or after a power loss. 

Press CANCEL UPPER to clear. When the oven is not in use, the 

time of day is displayed. If the range is in Energy Save mode, the 

display will be blank when not in use.

Tones

Tones are audible signals, indicating the following:
One Tone

 

■

Valid keypad press

 

■

Oven is preheated (long tone).

 

■

Function has been entered.

 

■

Reminder, repeating each minute after the end-of-cycle tones

 

■

Invalid keypad press

 

■

End of cycle

Use the Clock/Tools keypad to change the tone settings.

Energy Save

The Energy Save mode puts the range into Sleep mode and 

reduces energy consumption.
To Activate the Energy Save Mode:
1.  Press and hold CLOCK/TOOLS for 3 seconds. “Energy saver 

on.” will appear in the display.

2.  The setting will be activated after 5 minutes.
To Deactivate the Energy Save Mode:
1.  Press and hold CLOCK/TOOLS for 3 seconds. “Energy saver 

off.” will appear in the display.

2.  The clock will reappear in the display and the range can be 

operated as usual.

Settings

Many features of the oven control can be adjusted to meet your 

personal needs. These changes are made using the Clock/Tools 

keypad.
Use the Clock/Tools keypad to scroll through the features that can 

be changed. Each press of the Clock/Tools keypad will advance 

the display to the next setting. After selecting the feature to be 

changed, the control will prompt you for the required input. Then 

press START or CANCEL UPPER to exit and display the time 

of day. Details of all of the feature changes are explained in the 

following sections.
Press CANCEL UPPER to exit Settings.

Clock

The Clock can use a 12- or 24-hour cycle.
1.  Press CLOCK/TOOLS until “CLOCK” is displayed.
2.  Press START to change the time.
3.  Press “3” for AM or “6” for PM.
4.  Use the number keypads to set the time of day.
5.  Press START or CANCEL UPPER to exit and display the  

time of day.

Fahrenheit and Celsius

The temperature is preset to Fahrenheit but can be changed  

to Celsius.
1.  Press CLOCK/TOOLS until “TEMP UNIT” is displayed.
2.  The current setting will be displayed.
3.  Press the “1” keypad to adjust the setting.
4.  Press START or CANCEL UPPER to exit and display the  

time of day.

Audible Tones Disable

Turns off all tones, including the end-of-cycle tone and keypress 

tones. Reminder tones are still active when all tones are disabled.
1.  Press CLOCK/TOOLS until “SOUND” is displayed.
2.  The current setting will be displayed.
3.  Press the “1” keypad to adjust the setting.
4.  Press START or CANCEL UPPER to exit and display the  

time of day.

Sound Volume

Sets the volume of the tone to either high or low.
1.  Press CLOCK/TOOLS until “SOUND VOLUME” is displayed.
2.  The current setting will be displayed.
3.  Press the “1” keypad to adjust the setting.
4.  Press START or CANCEL UPPER to exit and display the  

time of day.

End-of-Cycle Tone

Activates or turns off the tones that sound at the end of a cycle.
1.  Press CLOCK/TOOLS until “END TONE” is displayed.
2.  The current setting will be displayed.
3.  Press the “1” keypad to adjust the setting.
4.  Press START or CANCEL UPPER to exit and display the  

time of day.

Keypress Tones

Activates or turns off the tones when a keypad is pressed.
1.  Press CLOCK/TOOLS until “KEYPRESS TONE” is displayed.
2.  The current setting will be displayed.
3.  Press the “1” keypad to adjust the setting.
4.  Press START or CANCEL UPPER to exit and display the  

time of day.

Reminder Tones Disable

Turns off the short repeating tone that sounds every 1 minute after 

the end-of-cycle tones.
1.  Press CLOCK/TOOLS until “REMINDER TONE” is displayed.
2.  The current setting will be displayed.
3.  Press the “1” keypad to adjust the setting.
4.  Press START or CANCEL UPPER to exit and display the  

time of day.

12/24 Hour Clock

1.  Press CLOCK/TOOLS until “12/24 HOUR” is displayed.
2.  The current setting will be displayed.
3.  Press the “1” keypad to adjust the setting.
4.  Press START or CANCEL UPPER to exit and display the  

time of day.

Demo Mode

IMPORTANT: This feature is intended for use on the sales floor 

with 120 V power connection and permits the control features 

to be demonstrated without the oven turning on. If this feature is 

activated, the oven will not work.
1.  Press CLOCK/TOOLS until “DEMO MODE” is displayed.
2.  The current setting will be displayed.
3.  Press the “1” keypad to adjust the setting.
4.  Press START or CANCEL UPPER to exit and display the  

time of day.