Nikon D2HS 用户手册

The camera clock is powered by a CR1616 lithium battery with a life of about 
four years.  If the 

 icon is displayed in the top control panel while the 

exposure meters are on, the battery is running low and needs to be replaced.  
When the battery is exhausted, the 

 icon will blink while the exposure 

meters are on.  Photographs can still be taken but will not be stamped with 
the correct time and date, and interval timer photography will not function 
correctly.  Replace the battery as described below.

1

 The clock battery chamber is located on the roof of the main battery 

chamber.  Turn the camera off and remove the EN-EL4 battery.

2

 Slide the clock battery chamber cover toward 

the front of the main battery chamber.

3

 Remove the clock battery.

4

 Insert  new CR1616 lithium battery so that the 

positive side (the side marked with “+” and 
the battery name) is visible.

5

 Slide the clock battery chamber cover towards 

the back of the main battery chamber until it 
clicks into place.

6

 Reinsert the EN-EL4.

7

 Set the camera to the current date and time.  

Until the date and time have been set, the  
icon will fl ash in the top control panel.

Use only CR1616 lithium batteries.  Using another type of battery could cause an ex-
plosion.  Dispose of used batteries as directed.

Insert the clock battery in the correct orientation.  Inserting the battery incorrectly 
could not only prevent the clock from functioning but could damage the camera.