Nikon D600 用户手册

下载
页码 368
123
r
6
Check the results.
If the camera was able to measure a value for white 
balance, C will flash in the control panel for about 
six seconds, while the viewfinder will show a flashing 
a.
If lighting is too dark or too bright, the camera may be 
unable to measure white balance. A flashing b a 
will appear in the control panel and viewfinder for 
about six seconds. Press the shutter-release button 
halfway to return to Step 5 and measure white balance 
again.
D
Direct Measurement Mode
If no operations are performed while the displays are flashing, direct measurement mode 
will end in the time selected for Custom Setting c2 (Standby timer0 227).
A
Selecting a Preset 
Selecting Preset manual for the White balance option in the 
shooting menu displays the dialog shown at right; highlight a preset 
and press J. If no value currently exists for the selected preset, 
white balance will be set to 5,200 K, the same as Direct sunlight.
Control panel
Viewfinder
Control panel
Viewfinder