Nikon D5300 参考手册

172 Wi-Fi

❚❚Terminating the Connection

Wi-Fi can be disabled by:
• Selecting Wi-Fi > Network connection > Disable in the camera setup menu
• Starting movie recording
• Turning the camera off

❚❚Restoring Default Settings

To restore default network settings, select Wi-Fi > Network settings > Reset 
network settings. A confirmation dialog will be displayed; highlight Yes and press 
J to restore default network settings.

A

While Wi-Fi is enabled, a 

c icon will flash in the information display. 

The icon will stop flashing once a connection has been established 
and the camera is exchanging data with the smart device.

D

Read the warnings on pages xvi to xviii before using the Wi-Fi function. To disable Wi-Fi in 
settings in which its use is prohibited, select Wi-Fi > Network connection > Disable in the 
camera setup menu. Note that Eye-Fi cards can not be used while Wi-Fi is enabled and that 
the standby timer will not turn off while the Wireless Mobile Utility app on the smart device 
is communicating with the camera. If no data are exchanged for about 5 minutes, the 
standby timer will turn off. The camera Wi-Fi function is only available when a memory card 
is inserted and can not be used when a USB or HDMI cable is connected. To prevent loss of 
power while connected, charge the battery before enabling the network connection.