Nikon D5300 参考手册

下载
页码 308
Error Messages
This section lists the indicators and error messages that appear in the viewfinder and 
monitor.
A
Warning Icons
A flashing 
d in the monitor or s in the viewfinder indicates that a warning or error message 
can be displayed in the monitor by pressing the 
W (Q) button.
Indicator
Solution
0
Monitor
Viewfinder
Lock lens aperture ring at 
minimum aperture (largest f/-
number).
(flashes)
Set lens aperture ring to minimum aperture 
(highest f-number).
Lens not attached
F/s 
(flashes)
• Attach non-IX NIKKOR lens.
• If non-CPU lens is attached, select mode M.
Before taking photos, rotate 
the zoom ring to extend the 
lens.
F
(flashes)
A lens with a retractable lens barrel button is 
attached with the lens barrel retracted. Press the 
retractable lens barrel button and rotate the zoom 
ring to extend the lens.
Shutter release disabled. 
Recharge battery.
d/s 
(flashes)
Turn camera off and recharge or replace battery.
This battery cannot be used. 
Choose battery designated for 
use in this camera.
d
(flashes)
Use Nikon-approved battery.
Initialization error. Turn 
camera off and then on again.
d/k 
(flashes)
Turn camera off, remove and replace battery, and 
then turn camera on again.
Battery level is low. Complete 
operation and turn camera off 
immediately.
End cleaning and turn camera off and recharge or 
replace battery.
Clock not set
Set camera clock.
15
No SD card inserted
S/s 
(flashes)
Turn camera off and confirm that card is correctly 
inserted.
Memory card is locked.
Slide lock to “write” position.
(flashes)
Memory card is locked (write protected). Slide card 
write-protect switch to “write” position.
This memory card cannot be 
used. Card may be damaged. 
Insert another card.
(/k 
(flashes)
• Use approved card.
• Format card. If problem persists, card may be 
damaged. Contact Nikon-authorized service 
representative.
• Error creating new folder. Delete files or insert 
new memory card.
12
• Insert new memory card.
• Eye-Fi card is still emitting wireless signal after 
Disable has been selected for Eye-Fi upload. To 
terminate wireless transmission, turn the camera 
off and remove the card.
Not available if Eye-Fi card is 
locked.
(/k 
(flashes)
Eye-Fi card is locked (write protected). Slide card 
write-protect switch to “write” position.