Nikon COOLPIX S9200 参考手册

Re
fere

nce

cti
o

Using 3D Photography

The camera takes one picture for each eye to simulate a three-dimensional image
on a 3D-compatible TV or monitor.

Frame the subject.

• The focus area that the camera focuses on can be

moved to areas other than the center of the frame. To
move the focus area, press the

k button before

taking the first picture, and then rotate the multi
selector or press

H, I, J, or K.

To adjust the following settings, press the

k button

to temporarily cancel focus area selection, and then
adjust each setting.

– Macro mode

– Exposure compensation

Press the shutter-release button to take the
first picture.

• The focus, exposure and white balance are locked

after the first shot, and R is displayed on the
monitor.

Move the camera horizontally to the right
until the translucent guide is aligned with
the subject.

• To cancel shooting, press the

k button.

Wait for the camera to automatically release the shutter.

• The camera automatically takes the second picture when it detects that the subject is

aligned with the guide.

• Shooting is canceled if the subject is not aligned with the guide within 10 seconds.

Rotate the mode dial to

y M d button M s 3D photography

8610

29m 0s

Cancel