Nikon D500 用户手册

254

❚❚ Setup Menu Options

The Location data item in the setup menu contains the options 
listed below.
• Position: The current latitude, longitude, altitude, Coordinated 

Universal Time (UTC), and heading (if supported) as reported 
by the source device.

• External GPS device options > Standby timer: Choose whether or not 

the standby timer is enabled when a GPS unit is attached.

• External GPS device options > Set clock from satellite: Select Yes to 

synchronize the camera clock with the time reported by the 
GPS device.

Standby timer enabled. The timer expires automatically if 
no operations are performed for the period specified in 
Custom Setting c2 (Standby timer, 

0 296), reducing the 

drain on the battery. If a GP-1 or GP-1A unit is connected, 
the unit will remain active for a set period after the timer 
expires; to allow the camera time to acquire location data, 
the delay is extended by up to one minute after exposure 
meters are activated or the camera is turned on.

Standby timer disabled, ensuring uninterrupted recording 
of location data.

A

The heading is only recorded if the GPS 
device is equipped with a digital compass 
(note that the GP-1 and GP-1A are not 
equipped with a compass). Keep the GPS 
device pointing in the same direction as the 
lens and at least 20 cm (8 in.) from the 
camera.