Nikon D500 用户手册
341
❚❚ Manual Cleaning
If foreign matter can not be removed from the image sensor
using the Clean image sensor (
using the Clean image sensor (
0 338) option in the setup
menu, the sensor can be cleaned manually as described below.
Note, however, that the sensor is extremely delicate and easily
damaged. Nikon recommends that the sensor be cleaned only
by Nikon-authorized service personnel.
Note, however, that the sensor is extremely delicate and easily
damaged. Nikon recommends that the sensor be cleaned only
by Nikon-authorized service personnel.
1
Charge the battery or connect an AC adapter.
A reliable power source is required when inspecting or
cleaning the image sensor. Turn the camera off and insert a
fully-charged battery or connect an optional AC adapter and
power connector. The Lock mirror up for cleaning option is
only available in the setup menu at battery levels over
A reliable power source is required when inspecting or
cleaning the image sensor. Turn the camera off and insert a
fully-charged battery or connect an optional AC adapter and
power connector. The Lock mirror up for cleaning option is
only available in the setup menu at battery levels over
J.
2
Remove the lens.
Turn the camera off and remove the lens.
Turn the camera off and remove the lens.
3
Select Lock mirror up for cleaning.
Turn the camera on and highlight
Lock mirror up for cleaning in the
setup menu and press
Turn the camera on and highlight
Lock mirror up for cleaning in the
setup menu and press
2.