Nikon D500 用户指南

44 Menu Guide

❚❚ Remote Flash Control

Choose from the following remote flash 
photography options.

Choose a separate flash control mode and flash level for 
each group of remote flash units. If Optical AWL or 
Optical/radio AWL is selected for Wireless flash options 
(

0 43), you can choose the channel used by the master 

flash to communicate with the remote flash units.

Choose for control of overall flash output. Use Quick 
wireless control options to adjust the balance between 
groups A and B and set the output for group C manually 
(the master flash does not fire). You can also adjust flash 
compensation for groups A and B and, if Optical AWL or 
Optical/radio AWL is selected for Wireless flash options 
(

0 43), choose the channel used by the master flash to 

communicate with the remote flash units.

The flash units fire repeatedly while the shutter is open, 
producing a multiple-exposure effect. Choose the flash 
level (Output), the number of times the flash units fire 
(Times), the number of times the units fire per second 
(Frequency), and, if Optical AWL or Optical/radio AWL is 
selected for Wireless flash options (

0 43), the channel 

used by the master flash to communicate with the remote 
flash units. Note that the number of times the flash units 
fire in total may vary depending on the options selected for 
Output and Frequency; see the documentation provided 
with the flash unit for details.