Nikon WT-3A (D200) 用户手册

System Requirements
Before using the WT-3 or WT-3 Setup Utility CD, confi rm that your system meets the 
following requirements:

• Model: Nikon D200 digital single-lens refl ex camera
• Firmware: A and B version 2.00 (provided on supplied WT-3 Setup Utility CD)

One EN-EL3e rechargeable Li-ion battery (supplied with D200) or EH-6 AC 
adapter (available separately)

• To connect to a computer: Windows XP Service Pack 1 or later (Service Pack 2 rec-

ommended) or Mac OS X version 10.3 or later required (Power PC G4/G5 CPUs 
only).  Connection to computers on other networks via router not supported.

• To upload pictures to an ftp server: Operation has been confi rmed with Windows XP 

Professional and Mac OS X version 10.3 or later.  Under these operating sys-
tems, ftp servers can be confi gured using standard ftp services such as IIS (In-
ternet Information Services).  Internet ftp connections and ftp servers running 
third-party software are not supported.

• Wireless: Wireless LAN access point or computer with built-in or external wire-

less LAN adapter (IEEE 802.11b or 802.11g compliant).

 2

• Ethernet: Ethernet cable and computer with built-in or external Ethernet port 

(100 base-TX or 10 base-T)

• WT-3 Setup Utility: required to copy computer profi les to camera (camera can be 

confi gured for use with ftp servers using either WT-3 Setup Utility or camera 
menus).  WT-3 Setup Utility can not be used to confi gure camera for use with 
optional PD-10 wireless printer adapter.

• CD-ROM drive: required when installing WT-3 Setup Utility
• USB: UC-E4 USB cable (included with camera) and computer with built-in USB 

port required when copying network profi les to camera.

 3

1.  For the latest information on supported operating systems, see the Nikon website for your 

area (  1).

2. For information on wireless network settings for Windows XP Professional and Mac OS X, 

see the online help for the WT-3 Setup Utility.

3. Connect the camera directly to the computer. The camera may not function as expected 

when connected via a hub, extension cable, or keyboard.

A PictBridge-compatible printer with a fl at (type A) USB connector is required for connection 
to the PD-10.  A computer is not required.

Simultaneous use of multiple WT-3 wireless transmitters with a single host may produce un-
expected results.  Do not attempt to use more than one WT-3 per host.