Canon PowerShot Pro 90 IS 用户指南
Using a Lens (Optional) / Lens Hood (Optional)
111
• Do not use the flash when the close-up lens is attached to the camera. The image
will be improperly recorded and the flash will not adjust its output correctly.
• Use the close-up lens with the focal length set to the maximum telephoto setting.
Lens Hood LH-DC58
This lens hood features a 58 mm thread. It can be
used to shield out unwanted light, in a blacklit
scene for example, and helps to produce clear
images with less ghosting and flare.
used to shield out unwanted light, in a blacklit
scene for example, and helps to produce clear
images with less ghosting and flare.
Attaching a Lens / Lens Hood
1
Attach a lens or lens hood by aligning it
with the lens mounting thread and
screwing it on in the direction of the
arrow.
with the lens mounting thread and
screwing it on in the direction of the
arrow.
Wide Converter WC-DC58
Installed
Installed
• Please note that images will not merge properly with the bundled PhotoStitch
program on the computer when they are shot in
mode with a wide converter
or close-up lens installed.
• To protect the lens, hold it with one hand while screwing it on with the other.
• Clean the lens completely of all dust and dirt before installing it on the camera.
• Clean the lens completely of all dust and dirt before installing it on the camera.
Dirt may confuse the focus.
• Please take due caution when handling the lenses because it is easy to leave
fingerprints on them, which confuses the focus.