Canon REALiS SX80 Mark II D 说明手册

115

Projec

ting a

n Ima
ge

 from 

a Dig

ital Came

ra or an 

USB 

Flash 

M

emo
ry

 (SX80 II)

Connect a PictBridge-compatible device with the projector using a USB cable.
The terminal form of the device varies depending on the model. Refer to the User's 
Manual for the relevant equipment.

Turn on the power of the PictBridge-compatible device.
When the communication is ready between the projector and the PictBridge-compat-
ible device, the following mark appears.

If the projector does not recognize the device or communi-
cation is disabled, the screen as shown in the right 
appears.
If a PictBridge-compatible device is connected, pull out 
the USB cable and connect it again.

If the screen as shown in the right (USB file browser) 
appears, the device supports the USB mass storage class 
(serves as an external hard drive to Windows computers), 
and you can project an image according to the system. For 
more details, refer to the page 

.

Operate the PictBridge-compatible device
Operate the PictBridge-compatible device to start "printing".
The image is transferred to the projector, and projected on the screen.

• You can select from [Single print (project single image)], [Continuous print (project 

all images continuously)], and [DPOF print (project specified image)].
With [DPOF print], up to 999 images can be specified for projection.

• To view the next image with [Continuous print] and [DPOF print] selected, press the 

OK button.

• Use a fully-charged battery for PictBridge-compatible device.
• Do not disconnect the cable until projection is ended unless the PictBridge-compati-

ble device allows to do so. For the removal procedure of the cable, refer to the User's 
Manual for the PictBridge-compatible device.

USB cable
(Digital camera/digital video camera)

Digital camera

Digital video camera

With Canon digital camera

With non-Canon digital camera