Canon DC40 说明手册
67
Advance
d
Feat
u
res
Chan
ging
the FUNC
. Set
ti
ngs
E
Continuous Shooting and Exposure
Bracketing
Bracketing
1. Set the camcorder to record still images on the card (
/
)
and set the mode dial to a position other than
.
If you are recording still images on the disc (
), change the media for the still
images (
36).
2. Press the DRIVE MODE button repeatedly to cycle between the drive
modes.
3. Press the PHOTO button halfway to activate the autofocus.
Continuous Shooting/High-Speed Continuous Shooting:
4. Press the PHOTO button fully and hold it pressed down.
A series of still images will be recorded as long as you hold the PHOTO button
pressed.
pressed.
Auto Exposure Bracketing:
4. Press the PHOTO button fully.
Three still images in different exposures will be recorded on the memory card.
The drive mode can also be selected from the FUNC. menu (
60).
The DRIVE MODE button cannot be used while the FUNC. menu is being
displayed.
SINGLE
Records a single still image.
CONT.SHOOT.
(Continuous Shooting)
Captures a series of still images as long as you hold the
PHOTO button pressed down. For the number of frames
per second, refer to the table on the next page.
PHOTO button pressed down. For the number of frames
per second, refer to the table on the next page.
HISPEED CONT.SHOOT.
(High-Speed Continuous
Shooting)
Shooting)
AEB (Auto Exposure
Bracketing)
Bracketing)
The camcorder records a still image in three different
exposures (dark, normal, light in 1/2 EV steps), allowing
you to choose the shot you like the best.
exposures (dark, normal, light in 1/2 EV steps), allowing
you to choose the shot you like the best.
PHOTO button
DRIVE MODE button
Mode dial