Canon Optura 200MC 说明手册
113
E
Using a Memory Car
d
Notes:
• To use the self-timer (
75), set the self-timer before step 3, and then
press the PHOTO button fully down.
• The wireless controller’s PHOTO button has no half-way setting. Press the
button fully and the camcorder immediately takes the image.
• When the subject is too bright (overexposure) in CARD CAMERA mode,
OVEREXP. will flash in the display. We recommend that you use the built-in
ND filter to reduce light entering lens.
ND filter to reduce light entering lens.
Open the menu and select CAM. SET UP. Then select ND and set it to
OFF and close the menu.
• When exposure is locked, OVEREXP. does not appear.
OFF and close the menu.
• When exposure is locked, OVEREXP. does not appear.
The indicators that appear in the display when recording to a
memory card:
memory card:
>>>> 50
1280
320
FINE
Image quality (
109)
Backup battery
(
(
160)
Remaining battery power
(
(
159)
Number of images that can
still be recorded on the
memory card (
still be recorded on the
memory card (
110)
File size of still images and
movies
movies
ND••••••••••AUTO
CAM.SET UP
(
40)
Memory Card Indication:
flashing in red: No card
in green:
in green:
6 or more images
in yellow:
1 to 5 images
in red:
No more images
• All indicators light in green when a memory card is played back.
• The remaining capacity indication varies depending on the recording
• The remaining capacity indication varies depending on the recording
condition. The remaining number may sometimes not decrease or decrease
by 2 images at a time.
by 2 images at a time.