Canon DP-V2410 手册
15
Installation/Connection
Connecting the Main Unit to Input Devices
The video display has 3G/HD-SDI and HDMI input terminals that input devices are connected to.
CAUTION
• Check that the power of the video display and input devices is switched off before connecting.
■
To input 4K signals using 3G/HD-SDI input terminal
• 3G/HD-SDI
3G/HD-SDI has four inputs which correspond to a display area. The display area icons located in the 3G/HD-SDI
input terminal area show where the input video is displayed on the screen. Please ensure these are connected
correctly as indicated by the icons.
3G/HD-SDI has four inputs which correspond to a display area. The display area icons located in the 3G/HD-SDI
input terminal area show where the input video is displayed on the screen. Please ensure these are connected
correctly as indicated by the icons.
Display area icon
SDI (IN) terminal
• 3G-SDI RAW
To input 3G-SDI RAW, signals with a frame rate of 30.00 P or smaller can be input using one input in Input A-D.
Signals with a frame rate over 30.00 P require two inputs either Input A and Input B or Input C and Input D.
To input 3G-SDI RAW, signals with a frame rate of 30.00 P or smaller can be input using one input in Input A-D.
Signals with a frame rate over 30.00 P require two inputs either Input A and Input B or Input C and Input D.
When the frequency is 30.00P or less
When the frequency is over 30.00P
Input A and Input B
Input C and Input D
Input A
Input B
Input C
Input D
Reference
• The connection is checked using Canare Corp. BNC cable (multi) 4VS03A-5C.
• 3G-SDI RAW throughout output corresponds to the terminal. Even during full-screen display, when signals are input from
• 3G-SDI RAW throughout output corresponds to the terminal. Even during full-screen display, when signals are input from
Input A, connect the cable to the SDI (OUT) terminal of Input A.