Canon DP-V2410 手册

Operating the Video Display

Using the Channel (CH) Button

You can assign channels (various settings related to input signal) to the CH buttons on the video display and switch
channels instantly.

1. Press the MENU button to open the OSD menu.

2. Select "System Settings" → "Function/Channel Button" → "Display Channel" and press the jog dial to

determine the selection.
A new window opens and displays button names CH1 to CH3.

3. Select the name of the button using the jog dial and press the jog dial to determine the selection.

The selection frame moves to next OSD menu level.

4. Select the channel to assign using the jog dial.

See "Channel Settings" (

43) for the configurable settings.

5. Press the jog dial to determine the selection.

The setting is confirmed.

The following content is assigned to channel buttons on the video display by factory default.

CH1

CH2

CH3

Input Configuration

3G/HD-SDI

HDMI

3G-SDI RAW

Select Input Signal

Automatic

Format

Automatic

Internal Sync

Off

Channel Name

(Blank)

Picture Mode

ITU-R BT.709

Canon Log

Color Range

Automatic

Checking Signal Information and Status of the Main Unit

The video display is equipped with a banner function which displays signal information or the status of the main unit.

1. Press the jog dial when the OSD menu is closed.

The channel name, signal information, and status of the main unit will be displayed in the banner. It will automatically
disappear after 6 seconds.

Note

• For more detailed signal information, please refer to the section on "Signal Information" (

• The "Detecting sync." banner will continue to appear until the input signal is synchronized.