Canon DP-V2410 手册

43

OSD Menu

Channel Settings

This menu is used for input related settings. Select the "Select Channel" and choose a channel number from CH1 to
CH30. Finally define the parameter of each of the "Channel Settings".

Item

Setting Options (underline indicates factory default)

Select Channel

Display the channel number. In addition, you can assign each content of "Channel Settings" to each
channel (

CH1 to CH30

Note

•  It may take 10 seconds when switching channels.

Input Configuration

Select the input. Factory default depend on the channel (

Select Input Signal

Sets the signal display method (

Automatic: "4K Input" and "Single Input/Dual Input" are automatically determined.
4K Input: Displays the signal transmitted over four inputs.

Single Input/Dual Input: Displays the signal of a single input (Single Input A-D) or dual input (Dual

Input A, B or C, D) onto the center of the screen.

Note

•  For HDMI, the setting is fixed to "Automatic".
•  For SD-SDI, only "Single Input A-D" can be selected.
•  For "Dual Input", only "3G-SDI RAW" can be selected.

Format

Sets the color format and gradation.

•  SDI Signal
Automatic, 4:2:2 YCbCr 10-bit, 4:2:2 YCbCr 12-bit, 4:4:4 YCbCr 10-bit, 
4:4:4 YCbCr 12-bit, 4:4:4 RGB 10-bit, 4:4:4 RGB 12-bit, 4:4:4 XYZ 10-bit, 4:4:4 XYZ 12-bit

•  HDMI Signal
Automatic, 4:4:4 XYZ 12/10-bit

Note

•  HD/SD-SDI is fixed to "4:2:2 YCbCr 10-bit".
•  For "3G-SDI RAW", the setting is fixed to "Automatic".
•  If set to "Automatic" when receiving 3G-SDI, all signals without a payload format will be

rendered in "4:4:4 RGB 10-bit". In addition, if there is one Payload or more of the four inputs,
they are rendered in a Payload that is selected in the order of priority A → B → C → D in the
display area.

•  To use 4:4:4 XYZ 10-bit for SDI signals, select "4:4:4 XYZ 10-bit". Then, signals will be

processed as signals where XYZ data is included in RGB data output in 4:4:4 RGB 10-bit
format.