Canon DP-V2410 手册
49
OSD Menu
Marker Settings
This menu is used to configure various markers.
Item
Setting Options (underline indicates factory default)
Marker Preset
Customizes markers which are assigned to markers 1 to 5.
Marker 1 to 5, Off
Marker 1 to 5, Off
Aspect Marker
"Aspect Marker" displays a range in accordance with the specified aspect ratio.
Note
"Aspect Marker" is not displayed in the following cases:
• When there is no signal, unsupported signal, or a channel with "Input Configuration" not set is
selected
• When an enlarged image is displayed
• During the execution of "Playback File" under "Screen Capture"
• When a "Test Pattern" is displayed
• During the execution of "Playback File" under "Screen Capture"
• When a "Test Pattern" is displayed
Enable
Switches the aspect marker On, Off.
On, Off
On, Off
Mask
Switches the mask color. Mask is the blanking area outside the range of the marker.
Black:
Black:
Half (50% gray):
Off: Turns mask off.
Aspect Ratio
Sets the aspect ratio of the aspect marker.
16:9, 15:9, 14:9, 13:9, 4:3, 2.39:1, 2.35:1, 1.896:1, 1.85:1, 1.66:1, Variable
The aspect ratio can be entered as a numeric value when you select "Variable" (0.01:1 increments). The
grayed out slider becomes active and can be used to set the aspect ratio.
1.00:1 to 3.00:1 (1.78:1)
16:9, 15:9, 14:9, 13:9, 4:3, 2.39:1, 2.35:1, 1.896:1, 1.85:1, 1.66:1, Variable
The aspect ratio can be entered as a numeric value when you select "Variable" (0.01:1 increments). The
grayed out slider becomes active and can be used to set the aspect ratio.
1.00:1 to 3.00:1 (1.78:1)
Line
Active when "Black" or "Half" is selected for "Mask". Switches lines on mask On, Off.
On, Off
On, Off
Line Width
Sets the thickness of the aspect marker line.
Thick, Normal, Thin
Thick, Normal, Thin