Canon DP-V2410 手册

56

OSD Menu

Item

Setting Options (underline indicates factory default)

Display Type

Sets the display type. When "Line" is selected, data for one line is displayed.
All, Line
Selects the line to be displayed when "Line" is selected.
  Select Line: 1 to 2160

Position

Selects the display position.
Bottom Left, Bottom Right

Guide

A guide is displayed at the specified position. "Guide" is not displayed when "255" is selected.
1 to 255

Standard
Level High

Sets the standard display level (high). "Standard Level High" is not displayed when "255" is selected.
190 to 255

Standard
Level Low

Sets the standard display level (low). "Standard Level Low" is not displayed when "0" is selected.
0 to 64

Color

Sets the signals to be displayed and the color of signals exceeding the standard level.
Y, Cb, Cr, R, G, B: Selects the signal.
Selects the color of the selected signal.

Default value of each signal is shown below.
Y (White), Cb (White), Cr (White), R (Red), G (Green), B (Blue)
Standard Level High, Standard Level Low: Selects the standard level.

Default value of each standard level is shown below.
Standard Level High (Magenta), Standard Level Low (Cyan)

Vector Scope

Configures various settings for the vector scope. Vector scope displays the intensity of color signals
and hue with the horizontal axis showing the color difference signal Cb and the vertical line showing
Cr.

Red

Green

Yellow

Blue

Cyan

Magenta

(Cb, Cr) = (255, 255)

(Cb, Cr) = (0, 0)

Cr

Cb

Note

•  When "Frame Hold", "Peaking" or "False Color" is "On", "Vector Scope" can not be displayed.
•  "Vector Scope" cannot be displayed during the execution of "Playback File" under "Screen

Capture", or when "Test Pattern" is displayed.

•  When "Vector Scope" is "On", "Wave Form Monitor" is "Off".

Enable

Switches the vector scope On, Off.
On, Off

Target

Sets the target.
75%, 100%

Position

Selects the display position.
Bottom Left, Bottom Right