Canon EOS REBEL T2i 说明手册

121

 

Under low or bright light conditions, the Live View image might not reflect 
the brightness of the captured image.

 

If the light source within the image changes, the screen might flicker. If 
this happens, stop and resume the Live View shooting under the actual 
light source to be used.

 

If you point the camera in a different direction, it might throw off the Live 
View image’s correct brightness momentarily. Wait until the brightness 
level stabilizes before shooting.

 

If there is a very bright light source in the picture, such as the sun, the 
bright area might appear black on the LCD monitor. However, the actual 
captured image will correctly show the bright area.

 

In low light, if you set the [6 LCD brightness] to a bright setting, 
chrominance noise may appear in the Live View image. However, the 
chrominance noise will not be recorded in the captured image.

 

When you magnify the image, the image sharpness may look more 
pronounced than it really is.

About the <E> icon

 

If the camera’s internal temperature becomes high, the <E> icon may 
appear on the screen. If you then continue with Live View shooting, the 
image quality might degrade. You should stop Live View shooting and 
allow the camera to rest.

 

If Live View shooting continues while the <E> warning icon is displayed 
and the camera’s internal temperature increases, the Live View shooting 
will stop automatically. Live View shooting will be disabled until the 
camera’s internal temperature decreases.

COP

Y