Canon EOS REBEL T2i 说明手册
177
Preparing to Print
6
Playback the image.
Press the <
x
> button.
X
The image will appear, and the <w>
icon will appear on the upper left to
indicate that the camera is connected
to a printer.
icon will appear on the upper left to
indicate that the camera is connected
to a printer.
w
PictBridge
Movies cannot be printed.
The camera cannot be used with printers compatible only with CP Direct
or Bubble Jet Direct.
or Bubble Jet Direct.
Do not use any interface cable other than the one provided.
If there is a long beeping sound in step 5, it indicates a problem with the
printer. To find out what’s wrong, do the following:
printer. To find out what’s wrong, do the following:
1. Press the <x> button to playback the image.
2. Press <0>.
3. On the print setting screen, select [Print].
2. Press <0>.
3. On the print setting screen, select [Print].
The error message will be displayed on the LCD monitor (p.184).
If you use a battery pack to power the camera, make sure it is fully
charged. With a fully-charged battery, printing up to approx. 4 hours is
possible.
charged. With a fully-charged battery, printing up to approx. 4 hours is
possible.
Before disconnecting the cable, first turn off the camera and printer. Hold
the plug (not the cord) to pull out the cable.
the plug (not the cord) to pull out the cable.
For direct printing, using AC Adapter Kit ACK-E8 (sold separately) to
power the camera is recommended.
power the camera is recommended.
COP
Y